期刊文献+

Microstructure and magnetic properties of Nd-Fe-B sintered magnets with P addition

Microstructure and magnetic properties of Nd-Fe-B sintered magnets with P addition
原文传递
导出
摘要 In this paper,the effects of P doping on magnetic properties and microstructure were studied in Nd-Fe-B sintered magnets.With P doping,the grain size gets refined and the distribution of the main phase is optimized due to the reduction of the liquidus temperature.The liquidus temperature for the 0.05 wt% P-doped magnets is 1022 K,while that for the P-free magnets is 1038 K.As P content increases,the liquidus temperature significantly decreases.Clear and continuous grain boundary phases are formed in the P-containing magnets with smaller grain size.The optimized microstructure with average grain size of 8.43 μm is obtained in the 0.05 wt% P-doped magnets,which is approximately 0.69 μm smaller than that of P-free sintered magnets (9.12 μm).Though P is usually thought to be an impurity element,it might be beneficial in Nd-Fe-B sintered magnets with proper addition.The coercivity of the 0.05 wt% P-doped magnets could be increased to 1283 kA·m-1,with slight changes of the remanence and the maximum magnetic energy product.NdPO4 phases in the grain boundary are of hexagonal structure,while those at the triple junctions have monoclinic structure.Activated sintering is achieved by doping proper P element in the Nd-Fe-B sintered magnets. In this paper,the effects of P doping on magnetic properties and microstructure were studied in Nd-Fe-B sintered magnets.With P doping,the grain size gets refined and the distribution of the main phase is optimized due to the reduction of the liquidus temperature.The liquidus temperature for the 0.05 wt% P-doped magnets is 1022 K,while that for the P-free magnets is 1038 K.As P content increases,the liquidus temperature significantly decreases.Clear and continuous grain boundary phases are formed in the P-containing magnets with smaller grain size.The optimized microstructure with average grain size of 8.43 μm is obtained in the 0.05 wt% P-doped magnets,which is approximately 0.69 μm smaller than that of P-free sintered magnets(9.12μm).Though P is usually thought to be an impurity element,it might be beneficial in Nd-Fe-B sintered magnets with proper addition.The coercivity of the0.05 wt% P-doped magnets could be increased to1283 kA·m-1,with slight changes of the remanence and the maximum magnetic energy product.NdP04 phases in the grain boundary are of hexagonal structure,while those at the triple junctions have monoclinic structure.Activated sintering is achieved by doping proper P element in the Nd-FeB sintered magnets.
出处 《Rare Metals》 SCIE EI CAS CSCD 2019年第8期770-775,共6页 稀有金属(英文版)
基金 financially supported by State Key Lab of Advanced Metals and Materials(No.2018-Z06) the Fundamental Research Funds for the Central Universities(No.FRFTP-18-025A1)
关键词 ND-FE-B sintered MAGNETS P MICROSTRUCTURE MAGNETIC properties ACTIVATED sintering Nd-Fe-B sintered magnets P Microstructure Magnetic properties Activated sintering
  • 相关文献

参考文献7

二级参考文献29

共引文献51

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部