摘要
上料系统是锂电池高速自动套管机的初始工作子系统,是自动化生产线的重要组成部分,决定着设备的自动化程度和工作效率。以锂电池高速自动套管机的自动上料系统为研究对象,通过自动上料方式的分析选择,利用SolidWorks三维造型软件设计自动上料系统,并通过ADAMS软件对系统进行运动学分析。结果表明,自动上料系统各结构之间的配合运动合理,上料位置精确,且没有产生干涉,因此结构设计合理。
Feeding system is the initial working subsystem of lithium battery high-speed automatic casing machine,which is essential for automatic production line and determines the automation degree and working efficiency of the equipment.The automatic feeding system of lithium battery high-speed automatic casing machine was taken as the research object.Through the analysis and selection of automatic feeding modes,the automatic feeding system was designed by SolidWorks3D modeling software,and the kinematics analysis of the system was carried out by ADAMS software.The results show that the matching motions among all the structures of automatic feeding system are reasonable,which has accurate feeding position and no interference.Therefore,the structure design is reasonable.
作者
明心健
夏琴香
刘秀娟
曹海霞
MING Xin-jian;XIA Qin-xiang;LIU Xiu-juan;CAO Hai-xia(School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510641,China;Zhuhai Higrand Technology Co.,Ltd.,Zhuhai 519000,China)
出处
《机电工程技术》
2018年第11期1-4,共4页
Mechanical & Electrical Engineering Technology
基金
广东省科技计划项目(编号:2017B090901033)
广东省精密装备与制造技术重点实验室项目(编号:PEMT1202)
关键词
锂电池
套管机
自动上料系统
ADAMS
lithium battery
casing machine
automatic feeding system
ADAMS software
