摘要
根据空压机曲轴加工车间的特点,提出采用单元化"一个流"生产方式和Flexsim仿真软件相结合的方法,解决生产线布置问题。在Flexsim仿真软件中对车间原始布置进行建模仿真,综合分析仿真数据,发现不合理的现象并提出改善策略。再结合单元化"一个流"生产方式,确定设施布置的优化方案。实例分析表明,单元化"一个流"生产方式和Flexsim仿真软件相结合的方法可以减少在制品的存储数量,提高生产效率。
According to the characteristics of air compressor crankshaft machining workshop,＂ One-Piece Flow＂ cell production mode and Flexsim simulation were adopted to solve the production line layout problem. The original layout of workshop of the sim- ulation model is established by Flexsim ,found unreasonable phenomenon and proposed improvement strategy. Then combining the ＂One-Piece Flow＂ cell production mode, determine the optimal facility layout scheme. Example analysis shows ： the combined ＂One-Piece Flow＂ cell production mode and Flexsim simulation can reduces the stock of semi-manufactured goods and improves production efficiency.
作者
胡明茂
李峰
Hu Mingmao, Li Feng(Dept. of Mechanical Engineering, Hubei Automotive Industries Institute, Shiyan 442002, Hubei, Chin)
出处
《现代制造工程》
CSCD
北大核心
2018年第3期86-92,共7页
Modern Manufacturing Engineering
关键词
空压机曲轴
单元生产
一个流
air compressor crankshaf
cell production
one-piece flow
