摘要
利用KH560对碳酸钙(CaCO_3)、氧化铝(Al_2O_3)、酸化后的多壁碳纳米管(MWCNTs)表面进行接枝改性,并制备了CaCO_3/Al_2O_3/MWCNTs/环氧树脂(EP)复合涂层。采用傅里叶变换红外光谱(FT-IR)、热重分析仪(TG)和EDS分析对改性前后的无机填料进行表征,使用电化学阻抗谱(EIS)、抗冲击试验、高温高压实验测试复合涂层的附着力、耐腐蚀等性能。同时用扫描电子显微镜(SEM)观察复合涂层表面形貌。结果表明,KH560成功的接枝在3种无机填料表面,当MWCNTs的质量分数为2%时,CaCO_3/Al_2O_3/MWCNTs/EP复合涂层的分散性最好,性能最优。
Heavy calcium carbonate,Al2 O3 and MWCNTs were surfaced modified with silane coupling agent KH560,and CaCO3/Al2 O3/MWCNTs/epoxy composite coating was prepared by heating drying process.The modified inorganic filler was characterized by means of infrared spectrum（FT-IR）,TGA and EDS.The impact resistance,adhesion and corrosion resistance properties of CaCO3/Al2 O3/MWCNTs/epoxy were tested by electrochemical impedance spectroscopy（EIS）,anti impact test,high temperature and high pressure test.Scanning electron microscopy（SEM）was used to observe the surface morphology of the coating.The results showed that the CaCO3/Al2 O3/MWCNTs/epoxy was successfully grafted on the surface of 3 inorganic fillers.When the adding amount of MWCNTs was 2%,the dispersion property of coating was the best.
作者
唐庆
饶富培
步宏光
梁新欣
唐世忠
杨涛
罗智
Tang Qing Rao Fupei Bu Hongguang Liang Xinxin Tang Shizhong Yang Tao Luo Zhi(Oil Production Technology Research Institute of CNPC,Tianjin 300280 School of Chemistry and Chemical Engineering,Southwest Petroleum University,Chengdu 610500)
出处
《化工新型材料》
CAS
CSCD
北大核心
2017年第10期76-79,共4页
New Chemical Materials
基金
大港油田公司重点科技攻关项目"油水井套损套变预防与治理配套技术深化研究与应用"(2015030501)
关键词
重质碳酸钙
氧化铝
表面改性
复合涂层
性能
heavy calcium carbonate,alumina,surface modification,composite coating,performance
