期刊文献+

基于应力松弛实验对服役25Cr35Ni型耐热钢的高温性能评估 被引量:4

High Temperature Performance Evaluation of As-serviced 25Cr35Ni Type Heat-resistant Steel Based on Stress Relaxation Tests
下载PDF
导出
摘要 以服役的25Cr35Ni型钢为对象,研究利用应力松弛实验开展高温性能评估的方法以及对持久性能的预测效果。结果表明:由于高温服役后晶界处碳化物出现网链状和奥氏体基体内二次碳化物明显粗化,25Cr35Ni型耐热钢持久性能降低。通过得到的不同温度和应力的松弛蠕变速率曲线及外推关系,结合松弛蠕变速率-断裂时间关系方程,可以实现由松弛实验及少量蠕变持久实验开展持久寿命评估。与基于高温持久实验的预测结果比较,两者吻合较好。 Based on an as-serviced 25Cr35Ni type steel , the high temperature property evaluation using stress relaxation test(SRT) method and residual life prediction were studied. The results show that creep rupture property decreases because of the formation of network carbides along grain boundaries and coarsening of secondary carbides in the austenitic matrix. Based on the relationship of stress relax-ation strain rate curves obtained at different temperatures, and the extrapolation equation of stress re-laxation rate-rupture time, it is capable to perform residual life evaluation by combining SRT data and a small amount of creep rupture test(CRT). Good agreement is observed for predicting results per-formed by current method and traditional method.
出处 《材料工程》 EI CAS CSCD 北大核心 2017年第8期96-101,共6页 Journal of Materials Engineering
基金 国家高技术研究发展计划(863计划)资助项目(2015AA034402) 山西煤基低碳联合基金重点资助项目(U1610256)
关键词 25Cr35Ni型耐热钢 应力松弛 寿命预测 TTP参数法 25Cr35Ni type heat-resistant steel stress relaxation life prediction TTP parameter method
  • 相关文献

参考文献10

二级参考文献110

  • 1黄晓婧,王俊彪,张贤杰.铝合金时效蠕变与时效应力松弛关系研究[J].航空制造技术,2011,0(11):99-101. 被引量:12
  • 2MARAHLEH G, KHEDER A R I, HAMAD H F. Creep life prediction of service-exposed turbine blades[J]. Materials Science and Engineering, 2006, A: 305-309. 被引量:1
  • 3LARSON F R, JAMES MILLER. A time-temperature relation- ship for rupture and creep stresses[J]. ASME Trans, 1952, 74 (5): 765-771. 被引量:1
  • 4YAMAMOTO Y, BRADY M P, LU Z P, et al. Creep-resistant, Al2O3-forming austenitic stainless steels[J]. Science, 2007, 316 : 433-436. 被引量:1
  • 5RAY A K, TIWARI Y N, ROY P K, et al. Creep rupture analysis and remaining life assessment of 2.25Cr-1Mo steel tubes from a thermal power plant[J]. Materials Science and Engineering, 2007, A 454-455: 679-684. 被引量:1
  • 6MANSON S S, HAFERDA M. A linear time-temperature relation for extrapolation of creep and stress-rupture data[J]. NACA TN, 2890: 1953.1-12. 被引量:1
  • 7WOO GON KIM, SONG NAM YOON, WOO SEOG RYU. Application and standard error analysis of the parametric methods for predicting the creep life of type 316LN SS[J]. Key Engineering Materials, 2005, 297- 300: 2272-2277. 被引量:1
  • 8National Research Insitute for Metals. NRIM Creep Data Sheet 1B [M]. Japan: National Research Institute for Metals, 1996. 6-8. 被引量:1
  • 9National Research Insitute for Metals. NRIM Creep Data Sheet 9B [M]. Japan: National Research Institute for Metals, 1990. 5-8. 被引量:1
  • 10National Research Insitute for Metals. NRIM Creep Data Sheet 3B [M]. Japan: National Research Institute for Metals, 1986. 4 -7. 被引量:1

共引文献49

同被引文献30

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部