摘要
通过对纤维缠绕机的结构特性和工作原理的概述,发现目前国内纤维缠绕机存在的问题和不足,然后根据实际生产需要在建模软件Creo中对气瓶纤维缠绕机自动挂纱机构进行设计与装配。利用MECH/PRO接口将挂纱机构模型导入ADAMS中,并对其进行了挂纱运动仿真,对几种常见型号的气瓶芯模进行模拟挂纱,获得了机构的运动特性。研究结果表明,所设计的纤维缠绕机自动挂纱机构满足多种尺寸的芯模挂纱设计要求,对解决目前国内纤维缠绕机存在自动化程度不高的问题有一定的指导意义。
Based on the summarization of the structure and working principle of the filament winding machine, the problems and shortcomings of the current filament winding machine are found. Then, the design of hanging fiber automatically on winding machine about cylinder is carried out in the modeling software Creo according to the actual production needs. The kinematical properties of the mechanism are obtained by simulating the threading of several common gas cylinder core molds by introducing the model into the ADAMS by MECH/PRO interface. The results show that the design of hanging fiber automatically on filament winding machine can meet the requirements of core mold with various sizes, which is of great significance to solve the problem of low degree of automation in filament winding machine.
出处
《玻璃钢／复合材料》
CSCD
北大核心
2017年第5期80-83,共4页
Fiber Reinforced Plastics/Composites
基金
武汉理工大学创新团队研究项目基金(20310232)
关键词
纤维缠绕机
自动挂纱
ADAMS
运动仿真
fiber winding machine
hanging fiber automatically
ADAMS
motion simulation
