摘要
为了提高桥头交叉口的通行能力以及减轻桥梁的承重力,提出了基于机动车比功率(VSP)环境影响因素和排队长度的交叉口信号配时优化方法;建立以减少排放和降低排队长度为总目标的信号交叉口优化模型,使用Matlab进行代码编程求解,达到优化信号配时之目的;并以福清市玉融大桥南侧桥头交叉口实例进行验证。结果表明:在晚高峰阶段,交通总排放量降低11.5%,桥上排队长度降低16.1%。
To improve the traffic capacity of the intersection and reduce the bearing capacity of the bridge, the optimization method of intersection signal timing is introduced based on the vehicle specific power (VSP), the environmental factors and queue length. A traffic signal control model was developed to reduce emissions and queue length, by using Matlab. Meanwhile, the signal cycle and the length of the green light were optimized. In addition, the model was verified with the bridge intersection on the south side of YuRong Bridge. Results indicated that find: during the late peak period, the traffic emissions were reduced by 11.5%, and the length of queue was reduced on bride by 16.1%.
出处
《中国科技论文》
CAS
北大核心
2016年第19期2179-2182,共4页
China Sciencepaper
基金
国家自然科学基金资助项目(41201100)
福建农林大学科技创新(培育)团队资助计划项目(pytd12006)
关键词
信号配时
低排放
排队长度
机动车比功率
交通仿真
signal timing
low emission
queue length
motor vehicle specific power
traffic simulation