期刊文献+

带式输送机软启动技术的应用分析 被引量:6

Analysis on Application of Soft Starting Technology of Belt Conveyor
下载PDF
导出
摘要 带式输送机是煤矿生产运输系统的关键部分,其工作性能的好坏直接关系到煤矿的生产效率,而软启动技术保证了带式输送机的顺利启动。软启动技术方案的选择是需要综合判断的,为此重点阐述了带式输送机软启动的必要性,分析介绍了常用带式输送机软启动装置的工作原理、结构型式和技术特性,综合对比了各软启动方案的性能特点,并概括了各类软启动装置的选用要求和适用范围,为设计研究和煤矿应用单位在选用更经济适用的驱动方案提供了参考。 Belt conveyor is the key part of the coal mine production and transportation system, its working performance is directly related to the production efficiency of the coal mine, and soft start technology to ensure the smooth start of belt conveyor. But the choice of soft start technology scheme is requires a comprehensive judgment, this paper expounds the necessity of conveyor soft start of belt, analyzes and introduces the existing common belt conveyor soft start device and its working principle, structure type and technical characteristics, a comprehensive comparison of the performance characteristics of the soft start scheme, and summarizes the requirements of selecting and using all kinds of soft start device and the scope of application, research and design for coal mine application units in the selection of the function of the system for reference, in order to choose the more economical and suitable driving scheme.
出处 《煤矿机电》 2016年第6期12-16,22,共6页 Colliery Mechanical & Electrical Technology
关键词 带式输送机 电气软启动 液力偶合器调速 液黏调速 变频调速 永磁偶合调速器 液压调速 belt conveyor soft start liquid couple speed control hydraulic bonding speed variable frequencyspeed regulation permanent magnet coupling speed regulation hydraulic speed regulation
  • 相关文献

参考文献7

二级参考文献33

  • 1陈学荣,张天福,袁秀梅.地下大功率带式输送机驱动电机变频调速可行性方案[J].矿山机械,2004,32(8):75-76. 被引量:2
  • 2增一男,宋旭安.叶山矿长距离带式输送机的运行实绩[J].国外金属矿山,1994,19(10):21-25. 被引量:1
  • 3成一之,黄居森,郭建新.高寒地区带式输送机慢速驱动装置[J].起重运输机械,1994(4):9-12. 被引量:1
  • 4中煤国际工程集团沈阳设计研究院.大型露天矿设备国产化布局的研究[R].2001.Shenyang Coal Engineering & Research Institute,CHINACDC. Research on Equipment Arrangement of Large Open Coal Mine[R]. 2001. 被引量:1
  • 5SINGH M P, ELLIOTT M. Maximizing the perfor mance and economics of complex belt conveyors through integrated design [J]. Bulk Solid Handling,1995, 15(2): 239-244. 被引量:1
  • 6FAUERBACH R, OTREBSKI M. The syferfontein overland conveyor system at sasol secunda plant in south africa[J]. Bulk Solid Handling, 1993, 13 (2):289-295. 被引量:1
  • 7FAUERBACH R, OTREBSKI M, Kunicki J. SIGMA-a curved conveyor plant with special control[J].Bulk Solid Handling, 1994, 14(1): 13-19. 被引量:1
  • 8FUNKE H, HARTMANN K, LAUHOFF H. Design and operating performance of a long distance belt conveyor system with horizontal curves and simultaneous material transport in the upper and lower strands[J].Bulk Solid Handling, 2000, 20(1): 45-55. 被引量:1
  • 9GRABNER K. Operation of the curve-going belt con veyor"bio-TEC" at titan cement [J]. Bulk Solid Han dling, 1997, 17(2): 266-269. 被引量:1
  • 10JAMES G L. Design of a 13. 1km overland conveyor[J]. Bulk Solid Handling, 1992, 12(3): 539-545. 被引量:1

共引文献157

同被引文献19

引证文献6

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部