摘要
为解决ET22型风分器高速皮带机易跑偏及风分仓下仓体漏料量大的问题,一方面通过将高速皮带机两侧固定式挡边装置改造为活动式,保证挡边装置的密封性,避免物料进入到高速皮带机主、从动辊引起高速皮带跑偏;另一方面在风分仓下仓体加装导风装置,将风力导引到网带出料端,通过风力对网带回带的物料进行反吹,减少风分仓下仓体漏料量。实际应用表明,改进后高速皮带测偏装置报警次数由原来的16~24次/月下降到0~9次/月,风分仓下仓体漏料量下降了36.2%~66.0%。
To solve the problems of ET22 Pneumatic Separator for high speed belt machine, which is easy to deviation and pneumatic separator chamber leakage of large amount of material, two methods were put forward. On the one hand, transformed the fixed type of re- taining belt into a movable type to ensure side seal, avoided material into high speed belt conveyor main roller and the driven roller caused by high speed belt deviation, on the other hand in the pneumatic sep arator chamber installed wind guiding device, and the wind was guided to the end of halftone, through the wind on the halftone back materials anti blowing, reduced Pneumatic Separator material leakage. After improvement, the improved high speed belt deflection device alarm number from the original 16-24 / down to 0-9 times per month, wind positions lower body leakage decreased by 36.2% -66 %.
出处
《食品与机械》
CSCD
北大核心
2016年第9期74-76,共3页
Food and Machinery
基金
中式卷烟制丝生产线重大专项项目(编号:110201101014)
福建中烟工业有限责任公司科技项目(编号:FJZYJH2014025)
关键词
风分器
高速皮带机
活动式挡边
导风装置
Pneumatic Separator
high speed beh conveyor
movableretaining belt
wind guiding device
