摘要
借助搅拌摩擦加工工艺制备了AZ31细晶镁合金,研究对比了原始母材和各种晶粒尺寸细晶镁合金的超塑性行为。结果表明:AZ31板材平均晶粒尺寸由7.67μm细化到0.94~3.21μm。在450℃,应变速率5×10^(-4) s^(-1)时原始母材最大延伸率为630%,搅拌摩擦加工后的材料最大延伸率为405%,说明晶粒尺寸与超塑性性能没有线性关系。超塑性变形机制主要是晶界滑移,孪生对变形也有一定影响。断裂机制是晶间微小空洞的形成、长大和连接。
AZ31 magnesium alloy with fine-grained microstructure was prepared by friction stir processing（FSP）.The superplasticity of base metal（BM） and fine-grained AZ31 magnesium alloy with different grain sizes were compared.The results show that microstructure of the AZ31 hot-rolled plate with an average grain size of 7.67 μm is refined to 0.94～3.21 μm.The maximum elongation of the BM is 630% at 450 °C and 5×10（-4 ）s（-1）,while that of the FSP AZ31 alloy is 405% in the same situation,indicating there is no linear relationship between grain size and superplastic performance.Superplastic deformation mechanism is mainly grain boundary sliding,and twin crystal also affects the deformation.The failure mechanism is cavity generation,growth and coalescence.
出处
《稀有金属材料与工程》
SCIE
EI
CAS
CSCD
北大核心
2016年第7期1855-1860,共6页
Rare Metal Materials and Engineering
基金
国家自然科学基金(51274161
U1360105)
西安建筑科技大学青年科技基金(QN1303)
关键词
搅拌摩擦加工
AZ31镁合金
超塑性
friction stir processing
AZ31 magnesium alloy
superplasticity
