摘要
Microstructural features of a duplex-phase Zr-2.5Nb alloy were investigated in detail using electron channeling contrast （ECC） imaging and electron backscatter diffraction （EBSD） technique in an emission gun scanning electron microscope （FEGSEM）. The excellent resolution provided by the FEGSEM promises the combined utilization of both techniques to be quite adequate for characterizing the duplex-phase microstructures. Results show that the microstructure of the Zr-2.5Nb alloy is composed of bulk a grains （majority） in equiaxed or plate shape and thin 13 films （minority） surrounding the bulk grains, with their average grain size and thickness measured to be 1.4 prn and 72 nm, respectively. Analyses on a-grain boundaries reveal a number of low angle boundaries, most of which belong to deformation-induced dislocation boundaries. Measurements on relative propor- tions of various Burgers boundaries suggest very weak （if any） variant selection during 13 ~ a cooling, which should be re- lated to deformation-induced higher nucleation rate of a phases. Compared to earlier attempts, more satisfactory indexing of fine β phases （down to nanoscale） is attained by the FEGSEM-based EBSD. Examples are presented to clearly reveal well-obeyed Burgers orientation relationships between adjacent α and β phases. Finally, it is deduced that continuing applica- tion of the FEGSEM-based EBSD to duplex-phase Zr alloys could help clarify controversies like the deformation priority of the two phases.
基金
supported by the National Natural Science Foundation of China(Grant Nos.51401040
51371202
51531005&51421001)
China Postdoctoral Science Foundation(Grant No.2015M572446)
Postdoctoral Science Foundation of Chongqing(Grant No.Xm2015003)
Scientific and Technological Research Program of Chongqing Municipal Education Commission(Grant No.KJ1500901)
