摘要
为实现对卷烟纸均匀稳定施胶,对ZJ17卷烟机卷烟纸施胶系统进行改进设计,在其胶缸和喷胶嘴之间依次加装齿轮泵和质量流量计,并通过PLC控制器控制驱动齿轮泵的伺服电机,以及实现质量流量计的跟踪反馈。使用效果表明,改进后,同一机台卷烟机施胶量的标准偏差由原来的0.17mg/支降低到0.02 mg/支;不同机台施胶量由原来相差2.35 mg/支,降低到0.30 mg/支;卷烟感官质量稳定一致,改进设计的施胶系统具有很强的市场利用价值。
Improvement was made on the cigarette paper sizing system of ZJ17 cigarette machine.The gear pump and the mass flow meter is between the original rubber cylinder and spray nozzle,and through the PLC controller to control the servo motor to drive the gear pump,the mass flow meter tracking feedback,the sizing of cigarette paper uniform stability.Application effects showed that the standard deviation of a cigarette machine sizing decreased from0.17 mg per cigarette to 0.02 mg per cigarette,different equipment sizing from the original difference 2.35 mg per cigarette reduced to the maximum difference 0.30 mg per cigarette after improved,and the cigarette sensory quality stable and consistent.The improved sizing system design has a very strong market value in use.
出处
《食品与机械》
CSCD
北大核心
2016年第2期81-83,共3页
Food and Machinery
关键词
ZJ17卷烟机
卷烟纸
施胶系统
改进设计
物理质量
感官质量
ZJ17units
cigarette paper
sizing system
revised design
physical quality of cigarette
sensory quality of cigarette
