期刊文献+

油井套管脉冲电流阴极保护监控系统设计 被引量:4

Design of Pulse Current Cathodic Protection Monitoring System for Oil Well Casing
下载PDF
导出
摘要 目的设计油井套管脉冲电流阴极保护远程监控系统,确保脉冲电流阴极保护系统安全运行状态,实现集约化、数字化管理。方法基于二次逆变及GPRS无线通信技术,设计采用C8051F020单片机为控制核心的脉冲电源系统,并通过HAR306模块实现GPRS无线数据传输,结合远程监控中心对油井套管脉冲电流阴极保护过程进行实时监控。结果该系统具有投入成本低、组网方便、数据传输稳定可靠、人机界面友好、功能强大等优点,可以实现油井套管脉冲电流阴极保护的集约化、数字化、智能化管理。结论采用二次逆变方法设计油井套管脉冲电流阴极保护专用电源主电路,在此基础上应用GPRS技术设计脉冲电流阴极保护远程无线监控系统的方案是可行的。 ABSTRACT:Objective To design a remote monitoring system of pulsed current cathodic protection for oil well casings,in order to ensure the operation safe and achieve intensive, digital management with cathodic protection. Methods Based on the secondary in-version and GPRS technology, the microcomputer of C8051F020 was used as the control core for the pulse power supply system and the GPRS module of HAR306 for wireless data transmission,combining with remote monitoring center, real-time monitoring for oil well casing pulsed current cathodic protection was realized. Results The system had advantages such as low cost,powerful network building,friendly interface,powerful function and reliable data transmission,which could realize the digital, intensive and intelligent management for pulse current cathodic protection. Conclusion The main circuit of pulsed current power for well casing cathodic protection was designed using the second inverter method,on this basis,the scheme of designing wireless remote monitoring system using the GPRS technology was feasible.
出处 《表面技术》 EI CAS CSCD 北大核心 2015年第3期133-137,共5页 Surface Technology
基金 国家自然科学基金项目(51271146) 陕西省科技统筹创新工程计划项目(2013KTCL-04)~~
关键词 GPRS 油井套管 脉冲电流 阴极保护 监控系统 GPRS well casing pulsed current cathodic protection monitoring system
  • 相关文献

参考文献13

二级参考文献47

共引文献84

同被引文献38

  • 1钱勇,李承文,龚健,任翠英,潘娜娜.多功能逆变焊机功率变压器设计[J].焊接技术,2013,42(5):59-61. 被引量:2
  • 2邱于兵,朱鸿赫,余成平,郭兴蓬,程明山.方波脉冲电流阴极保护效果的实验研究[J].腐蚀与防护,2004,25(12):520-522. 被引量:3
  • 3王佳,孟洁,唐晓,张伟.深海环境钢材腐蚀行为评价技术[J].中国腐蚀与防护学报,2007,27(1):1-7. 被引量:55
  • 4VENKATESHAN R, VENKATASAMY M A, BHASKARAN T A, et al. Corrosion of Ferrous Alloys in Deep Sea Environ- ments[J]. British Corrosion Journal, 2002,37 (4) : 257-266. 被引量:1
  • 5KIM S J, JANG S K, KIM J. Electrochemical Study of Hydro- gen Embrittlement and Optimum Cathodic Protection Poten- tial of Welded High Strength Steel[J]. Metals and Materials In- ternational, 2005 ( 11 ) : 63--69. 被引量:1
  • 6KIM S J, JANG S K, KIM J. Effects of Post-weld Heat Treat- ment on Optimum Cathodic Protection Potential of High-Strength Steel in Marine Environment Conditions[J]. Materials Science Forum, 2005 ( 5 ) : 133-136. 被引量:1
  • 7BATT C, DODSON J, ROBINSON M J. Hydrogen Embrittle- ment of Cathodically Protected High Strength Steel in Sea Water and Seabed Sediment[J]. British Corrosion Journal, 2002,37 : 194-198. 被引量:1
  • 8FESTY D. Cathodic Protection on Steel in Deep Sea: Hydro- gen Embrlttlement Risk and Cathodic Protection Criterla[C]// NACE 2001.Las Vegas, 2001. 被引量:1
  • 9CHEN S, HARTT W, WOLFSON S. Deep Water Cathodic Protection: Part 2-Field Deployment Results[J]. Corrosion, 2003,59(8) :721-732. 被引量:1
  • 10DVN. DNV-RP-B401 ,Cathodic Protection Design[S]. 被引量:1

引证文献4

二级引证文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部