期刊文献+

稳态热传导结构非概率可靠性拓扑优化设计 被引量:5

Topology optimization design of steady-state heat conduction structures considering non-probabilistic reliability
下载PDF
导出
摘要 研究具有区间参数的稳态热传导结构在散热弱度非概率可靠性约束下的拓扑优化设计问题。建立了以单元相对导热系数为设计变量,导热材料体积极小化为目标函数,满足散热弱度非概率可靠性为约束条件的稳态热传导结构的拓扑优化设计数学模型。基于区间因子法,推导出散热弱度的均值及离差的计算表达式。采用渐进结构优化法的求解策略与方法,并利用过滤技术消除优化过程中的数值不稳定性现象。通过算例验证所述模型及求解策略、方法的合理性和有效性。 Topology optimization design of a steady-state heat conduction structure with interval parameters under constraint of dissipation of heat potential capacity was studied.The topology optimization model of the heat conduction structure with interval parameter was constructed based on the constraint of non-probabilistic reliability for dissipation of heat potential capacity.The total volume of heat conductive material was minimized and the relative thermal conductivities of elements were regarded as the design variables here.The computational expressions of numerical characteristics of dissipation of heat potential capacity based on the interval factor method were derived.The evolutionary structural optimization method was used in the optimization.A filtering technique was employed to eliminate numerical instabilities in the process of topology optimization.The numerical examples were presented to demonstrate the feasibility and effectiveness of the optimal model and solving approach.
出处 《振动与冲击》 EI CSCD 北大核心 2015年第3期118-122,共5页 Journal of Vibration and Shock
基金 国家自然科学基金项目(51175398) 中央高校基本科研资金项目(K5051304016)资助
关键词 热传导 区间参数 非概率可靠性 区间因子法 拓扑优化 heat conduction interval parameters non-probabilistic reliability interval factor method topology op-timization
  • 相关文献

参考文献12

  • 1Huang X, Xie Y M. Evolutionary topology optimization of continuum structures including design-dependent self-weight loads[ J]. Finite Elements in Analysis and Design, 2011, 47 ( 8 ) : 942 - 948. 被引量:1
  • 2Zhuang Chun-gang, Xiong Zhen-hua, Ding Han. Topology optimization of the transient heat conduction problem on a triangular mesh [ J ]. Numerical Heat Transfer, 2013, 64(3) : 239 -262. 被引量:1
  • 3Zhuang Chun-gang, Xiong Zhen-hua. A global heat compliance measure based topology optimization for the transient heat conduction problem [ J ]. Numerical Heat Transfer, 2014, 65(5): 445-471. 被引量:1
  • 4Marck G, Nemer M, Harion J, et al. Topology optimization using the SIMP method for multiobjective conductive problems [J]. Numerical Heat Transfer, 2012, 61(6) : 439 -470. 被引量:1
  • 5Zhuang Chun-gang, Xiong Zhen-hua, Ding Han. Topology optimization of multi-material for the heat conduction problem based on the level set method[J]. Engineering Optimization, 2010, 42(9) : 811 -831. 被引量:1
  • 6Ahh S H, Cho S. Level Set-based topological shape optimization of heat conduction problems considering design- dependent convection boundary [ J ]. Numerical Heat Transfer, 2010, 58(5): 304-322. 被引量:1
  • 7Akihiro T, Gil H Y, Seung H J, et al. Structural topology optimization with strength and heat conduction constraints [ J ]. Computer Methods in Applied Mechanics and Engineering, 2014, 276:3411 -361. 被引量:1
  • 8李超,李以农,施磊,郑玲.圆柱壳体阻尼材料布局拓扑优化研究[J].振动与冲击,2012,31(4):48-52. 被引量:14
  • 9房占鹏,郑玲.约束阻尼结构的双向渐进拓扑优化[J].振动与冲击,2014,33(8):165-170. 被引量:17
  • 10Zheng Ling, Xie Rong-lu, Wang Yi, et al. Topology optimization of constrained layer damping on plates using Method of Moving Asymptote (MMA) approach [ J ]. Journal of Vibration and Shock, 2014, 33 ( 8 ) : 165 - 170. 被引量:1

二级参考文献34

共引文献319

同被引文献35

引证文献5

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部