摘要
基于元胞自动机法,结合Moore型邻居定义和晶粒生长理论,建立了增强相颗粒SiC对镁合金激光熔注中表层316L不锈钢晶粒生长的影响模型,模型考虑了晶界迁移率和晶界能等因素,实现了不同增强相颗粒体积分数和颗粒尺寸对晶粒生长影响的计算机模拟。结果表明,所建立的模型能较好的模拟晶粒生长过程,所得晶粒生长指数为0.42;增强相颗粒体积分数含量越高,晶粒生长越慢,晶粒尺寸越小;增强相颗粒尺寸越小,晶粒生长的越慢,晶粒尺寸越小,组织越均匀。
Based on the cellular automaton method,the definition of Moore neighbor type and the grain growth theory,a model of simulation for the grain growth process was established,which simulated the influence of the SiC reinforcement particles and 316L stainless steel reinforced the surface of magnesium alloy by laser melt inj ection.Many factors such as grain boundary mobility and grain boundary energy were considered in the mod-el.Simulated the influence of different volume fraction and size of reinforcement particles on the grain growth process were obtained.The results show that:the grain growth process can be simulated very well by the meth-od,the grain growth index can be obtained as 0.42;the higher volume fraction of the particles,the slower the speed of the grain growth,the smaller grain size;the smaller the particles size is,the slower the grain grows, the smaller grain size and the microstructure is more uniform.
出处
《功能材料》
EI
CAS
CSCD
北大核心
2015年第1期1089-1094,共6页
Journal of Functional Materials
基金
国家自然科学基金资助项目(51265014
51165008)
江西省科技厅科技资助项目(20142BDH8004)
关键词
激光熔注
晶粒生长
元胞自动机
镁合金
laser melt injection
grain growth
cellular automaton
magnesium alloy
