期刊文献+

原位反应Al-Cu复合材料的反应机理分析 被引量:6

Analysis on Reaction Mechanism of Aluminium Alloy Composites Prepared by In-Situ Reaction
下载PDF
导出
摘要 借助X射线衍射和扫描电镜对铝熔体中生成Al2 O3的原位反应进行热力学和动力学分析 结果表明 :在大气、低温条件下 ,CuO与铝反应能生成δ Al2 O3,δ Al2 O3颗粒在基体合金中能均匀分布 ,大小在 3~ 5 μm ;CuO与铝反应的热力学分析认为反应是可以自发进行的 ;利用宏观反应动力学理论 ,提出微粒模型 ,认为主要影响反应速度的因素是铝液与CuO微粒接触时的浓度、微粒的内部结构、表面积与其体积之比。 A thermodynamical and dynamical analysis of in situ reaction of Al 2O 3 is made with the help of XRD and SEM. The results show that:δ Al 2O 3 particles can be formed by CuO and aluminium reaction in atmosphere and at low temperature (750~800℃) and well distributed in matrix alloy. Particles' size is from 3 to 5 microns; CuO and aluminium reaction can occur spontaneously according to thermodynamics analysis; grain model is established by using macro reaction dynamics theory. It is found that the main factors which affect the reaction rate are aluminium consistence in contacting CuO grain, interior structure of grain, the ratio of grain superficial area and its volume, the figure coefficient of grain, et al.
出处 《江苏大学学报(自然科学版)》 EI CAS 2002年第2期70-73,共4页 Journal of Jiangsu University:Natural Science Edition
关键词 复合材料 原位反应 热力学 动力学 反应机理 铝铜复合材料 AL-CU复合材料 composites in situ reaction thermodynamics dynamics
  • 相关文献

参考文献6

二级参考文献11

共引文献20

同被引文献35

  • 1朱和国,吴申庆,王恒志,吴锵.Al_3Ti和Al_2O_3增强铝基复合材料的XD合成[J].中国有色金属学报,2001,11(z1):147-149. 被引量:4
  • 2孟繁琴,程晓民,胡斌,陈宏涛.原位反应法制备Al_2O_3/Al基复合材料的研究[J].特种铸造及有色合金,2004,24(4):63-64. 被引量:6
  • 3潘蕾,陶杰,刘子利,陈照峰.超声复合法制备的SiC_P/ZA27复合材料的力学性能[J].南京航空航天大学学报,2005,37(5):653-658. 被引量:9
  • 4陈刚,孙国雄.反应生成Al_2O_3(p)/Al-Cu复合材料的研究[J].特种铸造及有色合金,1997,17(3):1-4. 被引量:14
  • 5Sivaprasad K, Kumaresh Babu S P, Natarajan S. Study on abrasive and erosive wear behavior of Al6063/TiB2 in situ composites [J]. Materials Science and Engineering,2008,A498: 495-500. 被引量:1
  • 6Zhao Y H, Liao X Z. Simultaneously increasing the ductility and strength of nanostructured alloys [J]. Advanced Materials, 2006,18:2280-2283. 被引量:1
  • 7Shehata F, Fathy A, Abdelhameed M, et al. Preparation and properties of Al2O3 nanoparticle reinforced copper matrix composites by in situ processing [J]. Materials and Design, 2009,30:2756-2762. 被引量:1
  • 8Tsunekawa Y, Okumiya M, Suzuki H, et ol. Preparation of in-situ reinforced composites using ultrasonic vibration and selective incorporation of reinforcements by magnetic field [J]. Aluminum Transactions, 2000,2(1): 1-10. 被引量:1
  • 9Zhang S L, Zhao Y T, Chen G, et al. Microstructures and dry sliding wear properties of in-situ (Al3Zr + ZrB2)/Al composites [J]. J. Mater. Proce. Tech.,2007,184(1/3):201-208. 被引量:1
  • 10Li X C, Yang Y, Weiss D. Research progress on ultrasonic cavitation based dispersion of nanoparticles in AI/Mg melts for solidification processing of bulk lightweight metal matrix nanocomposite [J]. Metals and Materials Society,2007,213: 133-138. 被引量:1

引证文献6

二级引证文献34

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部