期刊文献+

Effects of defect states on the performance of CuInGaSe_2 solar cells 被引量:1

Effects of defect states on the performance of CuInGaSe_2 solar cells
原文传递
导出
摘要 Device modeling has been carried out to investigate the effects of defect states on the performance of ideal CulnGaSe2 (CIGS) thin film solar cells theoretically. The varieties of defect states (location in the band gap and densities) in absorption layer CIGS and in buffer layer CdS were examined. The performance parameters: open-circuit voltage, short-circuit current, fill factor, and photoelectric conversion efficiency for different defect states were quantitatively analyzed. We found that defect states always harm the performance of CIGS solar cells, but when defect state density is less than 10 14 cm-3 in CIGS or less than 10 18 cm-3 in CdS, defect states have little effect on the performances. When defect states are located in the middle of the band gap, they are more harmful. The effects of temperature and thickness are also considered. We found that CIGS solar cells have optimal performance at about 170 K and 2 μm of CIGS is enough for solar light absorption. Device modeling has been carried out to investigate the effects of defect states on the performance of ideal CulnGaSe2 (CIGS) thin film solar cells theoretically. The varieties of defect states (location in the band gap and densities) in absorption layer CIGS and in buffer layer CdS were examined. The performance parameters: open-circuit voltage, short-circuit current, fill factor, and photoelectric conversion efficiency for different defect states were quantitatively analyzed. We found that defect states always harm the performance of CIGS solar cells, but when defect state density is less than 10 14 cm-3 in CIGS or less than 10 18 cm-3 in CdS, defect states have little effect on the performances. When defect states are located in the middle of the band gap, they are more harmful. The effects of temperature and thickness are also considered. We found that CIGS solar cells have optimal performance at about 170 K and 2 μm of CIGS is enough for solar light absorption.
出处 《Journal of Semiconductors》 EI CAS CSCD 2014年第2期76-81,共6页 半导体学报(英文版)
基金 Project supported by the National Natural Science Foundation of China(Nos.11164014,11364025,51065014) the Science and Technology Pillar Program of Gansu Province(No.1204GKCA057)
关键词 device modeling defect states solar cell conversion efficiency device modeling defect states solar cell conversion efficiency
  • 相关文献

参考文献29

  • 1Chen X,Zhao Y,Yao R. Impact of lattice volume on the band gap broadening of isovalent S-doped CuInSe2[J].Journal of Semiconductors,2008.1883. 被引量:1
  • 2Cao J,Qu S,Liu K. Effect of bath temperature on the properties of CuInxGa1-xSe2 thin films grown by the electrodeposition technique[J].Journal of Semiconductors,2010.083003. 被引量:1
  • 3Song J,Li S S,Huang C H. Device modeling and simulation of the performance of Cu(In 1-x,Gax) Se2 solar cells[J].Solid-State Electronics,2004.73. 被引量:1
  • 4Bouloufa A,Djessas K,Zegadi A. Numerical simulation of CuInxGa1-xSe2 solar cells by AMPS-1D[J].THIN SOLID FILMS,2007.6285. 被引量:1
  • 5Novikov G F,Rabenok E V,Jeng M J. The study of loss kinetics of current carriers in copper-indium-gallium selenide by microwave photoconductivity method[J].Journal of Renewable Sustainable Energy,2012.011604. 被引量:1
  • 6Ishizuka S,Yamada A,Fons P. Flexible Cu(In,Ga)Se2 solar cells fabricated using alkali-silicate glass thin layers as an alkali source material[J].Journal Renewable Sustainable Energy,2009.013102. 被引量:1
  • 7Chu S,Majumdar A. Opportunities and challenges for a sustainable energy future[J].NATURE,2012.294. 被引量:1
  • 8Ramanathan K,Contreras M A,Perkins C L. Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2 thin-film solar cells[J].Progress in Photovoltaics:Research and Applications,2003.225. 被引量:1
  • 9Lin A G,Ding J N,Yuan N Y. Analysis of the p+/p window layer of thin film solar cells by simulation[J].Journal of Semiconductors,2012.023002. 被引量:1
  • 10Datta A,Damon-Lacoste J,Cabarrocas P R. Defect states on the surfaces of a p-type c-Si wafer and how they control the performance of a double heterojunction solar cell[J].Solar Energy Materials and Solar Cells,2008.1500. 被引量:1

同被引文献5

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部