摘要
应用电子鼻对燕麦(Avena sativa L)霉变程度进行区分,为了提高区分准确度,对电子鼻传感器阵列进行了优化的研究。每天随机选择10个燕麦样品进行电子鼻检测,试验连续进行5 d,将检测数据耦合入非线性双稳态随机共振系统,以外部Gaussian白噪声激励系统产生共振,选择输出信噪比特征值进行主成分分析,初期试验主成分1和主成分2贡献率之和为96.43%,且相同霉变程度样品离散度较大,不同霉变程度样品之间距离较近。为了提高电子鼻对霉变燕麦样品区分效果,进行了电子鼻传感器负荷加载分析,优化选择了传感器阵列,优化后主成分1和主成分2贡献率之和为99.31%,相同霉变程度燕麦样品的聚合度更高,使不同霉变程度燕麦样品之间的区分更加明显,为进一步的定量化检测奠定了基础。
Oats （Avena Sativa L.） are one of the important food crops. It contains some rich nutrients. Oats easily gets mildew affected by environmental factors during storage, which is getting to be one of problems in the food safety field. As one artificial olfactory analysis method, the electronic nose technique is widely applied in crop quality detecting fields. This technique utilizes a gas sensor array to imitate a human＇s olfactory system. The detecting signals measured by a gas sensor array is discriminated and recognized by an artificial pattern recognition method. Then the species of the detecting objectives can be determined. In this paper, electronic nose system was utilized to discriminate mildewed oat samples. The diagram includes three main parts： data acquisition and transmitting unit, sensor array and the chamber unit, and power and gas supply unit. The sensor array consisted of eight semiconductor gas sensors. Polytetrafluorethylene （PTFE） material was utilized to fabricate the chamber. Each sensor room was separated, which helped to eliminate the cross-influence of the gas flow. At the same time, gas sensor array optimization was also studied. 25 g of oat samples were weighed and placed into an experimental container. The container was tightly sealed with parafilm. 40 samples were prepared. All samples were stored under room temperature and standard atmospheric pressure. In order to accelerate the mildew procedure of the samples, 4 mL deionized water was sprayed on all samples every day. l0 samples were randomly selected in an electronic nose measurement. The measurement time of each oat sample was 45 s. The experiments lasted for five days. The measurement data was measured and transmitted to the computer. The stochastic resonance had three principal parts： a weak input signal, a non-linear bistable system, and an additional dose of external Gaussian white noise. The experimental data was coupled into a non-linear bistable stochastic resonance model. Stepping external Gaussian stimulating
出处
《农业工程学报》
EI
CAS
CSCD
北大核心
2013年第20期263-269,共7页
Transactions of the Chinese Society of Agricultural Engineering
基金
国家自然科学基金项目(81000645)
国家级创新创业训练计划项目(2012-11)
浙江省公益技术应用研究项目(2011C21051)
浙江省自然科学基金项目(Y1100150)
浙江省大学生科技创新活动计划项目(2012R408041)
浙江工商大学高等教育科学研究课题(Xgy13080)
浙江工商大学大学生创新项目(12-160
12-161
13-157
13-158)
浙江工商大学院级创新项目资助
关键词
传感器
优化
非线性分析
霉变燕麦
电子鼻
随机共振
sensors, optimization, nonlinear analysis, mildew oat, electronic nose, stochastic resonance
