期刊文献+

Structural and thermal sensitivity of Cu-Zr-Ti amorphous alloys to tension 被引量:4

Structural and thermal sensitivity of Cu-Zr-Ti amorphous alloys to tension
原文传递
导出
摘要 Structural and thermal sensitivity of Cu(60-x)Zr(30+x) Ti 10 (x=0,5,and 10 at%) amorphous alloys to the application of tension was investigated. The structural sensitivity to tension decreases with increasing Cu content. The crystallization enthalpy increases with increasing excess free volume. The characteristic temperatures of the tensile samples can surpass those of the as-cast ones under a critical heating rate which differs in the Cu content. The increase of the excess free volume significantly influences the glass transition and crystallization procedures. Structural and thermal sensitivity of Cu(60-x)Zr(30+x)Ti10 (x=0, 5, and 10 at%) amorphous alloys to the application of tension was investigated. The structural sensitivity to tension decreases with increasing Cu content. The crystallization enthalpy increases with increasing excess free volume. The characteristic temperatures of the tensile samples can surpass those of the as-cast ones under a critical heating rate which differs in the Cu content. The increase of the excess free volume significantly influences the glass transition and crystallization procedures.
出处 《Science China(Physics,Mechanics & Astronomy)》 SCIE EI CAS 2013年第8期1606-1610,共5页 中国科学:物理学、力学、天文学(英文版)
基金 the National Natural Science Foundation (Grant No. 50874045) the Scientific Research Fund of the Hunan Provincial Education Department (Grant No. 10A044)
关键词 Cu-based amorphous alloy tension sensitivity 结构灵敏度 热灵敏度 非晶合金 张力 自由体积 结晶程序 玻璃化转变
  • 相关文献

参考文献23

  • 1Das J, Tang M B, Kim K B, et al. "Work-hardenable " ductile bulk metallic glass. Phys Rev Lett, 2005, 94: 205501. 被引量:1
  • 2Kim K H, Kin H J, Lee J C. Effect of a minor element with a large mixing enthalpy difference on the plasticity of amorphous alloys. J Mater Res, 2007, 22: 2558-2564. 被引量:1
  • 3Pauly S, Liu G, Gorantla S, et al. Criteria for tensile plasticity in Cu-Zr-Al bulk metallic glasses. Acta Mater, 2010, 58: 4883-4890. 被引量:1
  • 4Pan J, Chan K C, Chen Q, et al. The effect of microalloying on mechanical properties in Cu-Zr-AI bulk metallic glass. J Alloys Compd, 2010,504: S74-S77. 被引量:1
  • 5Zhang W, Zhang Q S, Qin C L, et al. Formation and properties of new Cu-based bulk glassy alloys with critical diameter up to 1.5 cm. J Mater Res, 2009, 24: 2935-2940. 被引量:1
  • 6Shen Y, Xu J. Improving plasticity and toughness of Cu-Zr-Y-AI bulk metallic glasses via compositional tuning towards the CuZr. J Mater Res, 2010, 25: 375-382. 被引量:1
  • 7Kim K B, Das J, Baier F, et al. Heterogeneity of a CU47.sZr47sAls bulk metallic glass. Appl Phys Lett, 2006, 88: 051911. 被引量:1
  • 8Mattern N, Vainio U, Park J M, et al. Phase separation in CU46Zr47-xAl-Gd, metallic glasses. J Alloys Compd, 2011, 509: S23-S26. 被引量:1
  • 9Zhang Q S, Zhang W, Xie G Q, et al. Formation of a phase separating bulk metallic glass in CU40Zr40Al10Ag10 alloy. Mater Sci Eng B, 2008, 148:97-100. 被引量:1
  • 10Kovacs Z, Revesz A. Effect of local ordering on the decomposition of an amorphous Cu-Zr-Ti alloy. Appl Phys Lett, 2005, 87: 251909. 被引量:1

同被引文献23

引证文献4

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部