期刊文献+

行星齿轮箱故障诊断的扭转振动信号分析方法 被引量:33

Torsional Vibration Signal Analysis Method for Fault Diagnosis of Planetary Gearboxes
下载PDF
导出
摘要 行星轮的通过效应或行星架和太阳轮的旋转对啮合振动产生额外的调幅作用,导致横向振动信号的频谱结构非常复杂。扭转振动信号不受这些额外调幅效应的影响,它们的频谱结构更加简单。因此,扭转振动信号分析为行星齿轮箱故障诊断提供了一种有效方法。建立了行星齿轮箱扭转振动信号模型,推导了Fourier频谱、幅值解调谱和频率解调谱的解析表达式,总结了上述频谱的结构特点。应用故障实验数据验证了上述理论分析结果。 Planet passing effect or the rotation of sun gear and planet carrier produces extra amplitude modulation to gear meshing vibration, and thereby results in complex spectral structure of transverse vibration signals of planetary gearbox. Torsional vibration signals are theoretically free from extra amplitude modulation effects, and therefore their spectral structure is simpler than that of transverse vibration signals. Thus, it is a potentially effective approach to diagnose planetary gearbox faults via torsional vibration signal analysis. Explicit equations to model torsional vibration signals were given, and the Fourier spectrum and the demodulated spectra of amplitude envelope and instantaneous frequency were deduced in closed form. The torsional vibration signal characteristics of Fourier, envelope and instantaneous frequency spectra were summarized. The theoretical derivations were validated experimentally.
出处 《中国电机工程学报》 EI CSCD 北大核心 2013年第14期101-106,2,共6页 Proceedings of the CSEE
基金 国家自然科学基金项目(51075028 11272047) 北京市自然科学基金项目(3102022)~~
关键词 风力机 行星齿轮箱 故障诊断 扭转振动 解调 wind turbine planetary gearbox faultdiagnosis torsional vibration demodulation
  • 相关文献

参考文献15

  • 1McFadden P D, Smith J D. An explanation for the asymmetry of the modulation sidebands about the tooth meshing frequency in epicyclic gear vibration [J]. Proceedings of the Institution of Mechanical Engineers, 1985, 199(Ct): 65-70. 被引量:1
  • 2McNames J. Fourier series analysis of epicyclic gearbox vibration[J]. Journal of Vibration and Acoustics- Transactions oftheASME, 2002, 124(1): 150-152. 被引量:1
  • 3Mosher M. Understanding vibration spectra of planetary gear systems for fault detection[C]//Proceedings of ASME Design Engineering Technical Conferences, Chicago, USA, 2003. 被引量:1
  • 4Inalpolat M, Kahraman A. A theoretical and experimental investigation of modulation sidebands of planeary gear sets[J]. Journal of Sound and Vibration, 2009, 323(3-5): 677-696. 被引量:1
  • 5Inalpolat M, Kahraman A. A dynamic model to predict modulation sidebands of a planetary gear set having manufacturing errors [J]. Journal of Sound and Vibration, 2010, 329(4): 371-393. 被引量:1
  • 6McFadden P D, Smith J D. Effect of transmission path on measured gear vibration[J]. ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, 1986, 108(3): 377-378. 被引量:1
  • 7Kia S H, Henao H, Capolino G A. Torsional vibration assessment using induction machine electromagnetic torque estimation[J]. IEEE Transactions on Industrial Electronics, 2010, 57(t): 209-219. 被引量:1
  • 8Henao H, Kia S H, Capolino G A. Torsional-vibration assessment and gear-fault diagnosis in railway traction system[J]. IEEE Transactions on Industrial Electronics, 2011, 58(5): 1707-1717. 被引量:1
  • 9Randall R B. A new method of modeling gear faults [J]. Joumal of Mechanical Design, 1982, 104(2): 259-267. 被引量:1
  • 10McFadden P D. Detecting fatigue cracks in gears by amplitude and phase demodulation of the meshing vibration[J]. Journal of Vibration Acoustics Stress and Reliability in Design-Transactions of the ASME, 1986, 108(2): 165-170. 被引量:1

二级参考文献43

共引文献49

同被引文献196

引证文献33

二级引证文献185

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部