摘要
针对非圆车削加工技术的研究,提出一种直线驱动快速刀具进给机构,构建了非圆车削系统。重点研究了非圆截面零件的软靠模生成,并提出一种非类椭圆的建模方法。以中凸变椭圆活塞为例,利用快速刀具进给机构加工出最大椭圆度为6mm的中凸椭圆活塞试件,误差在15μm以内。实验结果表明,该设计方案能顺利完成非圆车削的任务。
A kind of fast tool feeding mechanism through linear drive was proposed and the overall design of non--circular turning system was accomplished, which focused on the formation of soft mould of non--circular cross--section parts. A new kind of modeling method of non--elliptic was pro- posed. Taking the machining of convex oval piston for example,a real convex oval piston model with the maximum ovality of 6mm and the maximum error of 15μm,is processed through fast tool feeding mechanism. The experimental results show that the design completes the taskes of non--circular turn- ing successfully.
出处
《中国机械工程》
EI
CAS
CSCD
北大核心
2012年第23期2869-2874,共6页
China Mechanical Engineering
基金
国家自然科学基金资助项目(60474021)
数字制造装备与技术国家重点实验室自主课题面上项目(20100732112)
关键词
高响应
直线电机
运动控制卡
非圆车削
快速进给
high response
linear motor
motion control card
non-- circular turning
rapid feed
