期刊文献+

低频电磁铸造过程中温度场的形成机理 被引量:2

Mechanism of Forming Temperature Field During Low Frequency Electromagnetic Casting
下载PDF
导出
摘要 通过理论解析研究了电磁场引起铸造过程中温度场改变的原因,并通过在铸造过程中连续测温的方法进行了实验验证.结果表明,低频电磁铸造对温度场产生影响的主要原因是低频电磁场引起熔体强制对流.强制对流对熔体产生强烈的搅拌作用,促进了熔体内部的热交换,加强了熔体与结晶器壁(石墨环)以及熔体和固液界面的传热,使熔体温度场非常均匀,接近于同一温度.研究还发现,低频电磁铸造过程对浇注温度不敏感,改变浇注温度,结晶器内熔体温度变化不大. How the temperature filed changes with the electromagnetic field was theoretically analyzed for low frequency electromagnetic casting (LFEC) and the results were experimentally verified by continuous temperature measuring in the casting process. It is shown that the forced convection of melt resulting from low frequency electromagnetic field functions as stirring the melt, thereby promotes the inside heat exchange of the melt and enhances the heat transfer between melt and mould and between melt and solid/liquid interface. A very uniform temperature field of melt was thus formed with almost the same temperature. It is also found that adjusting casting temperature can not change the melt temperature too much, indicating the low sensitivity of LFEC to the casting temperature.
出处 《东北大学学报(自然科学版)》 EI CAS CSCD 北大核心 2012年第8期1145-1149,共5页 Journal of Northeastern University(Natural Science)
基金 国家自然科学基金资助项目(51104043)
关键词 AL-ZN-MG-CU-ZR 低频电磁铸造 温度场 晶粒细化 微观组织 AI-Zn-Mg-Cu-Zr low frequency electromagnetic casting temperature field grain refinement microstructure
  • 相关文献

参考文献11

  • 1Dong J, Zhao Z, Cui J, et al. Effect of low-frequency electromagnetic casting on the castability, microstructure, and tensile properties of direct-chill cast AI-Zn-Mg-Cu alloy [J]. Metallurgical and Materials Transactions;A, 2004, 35(8) :2487 2494. 被引量:1
  • 2Zuo Y, Cui J, Dong J, et al. Effects of low frequency electromagnetic field on the as-cast microstructures and mechanical properties of superhigh strength aluminum alloy [J ]. Materials Science and Engineering : A, 2005,408 ( 1 / 2) :176 - 181. 被引量:1
  • 3Zuo Y B, Nagaumi H, Cui J Z. Study on the sump and temperature field during low frequency eleetromagnetie casting a superhigh strength A1-Zn-Mg-Cu alloy[J ]. Journal of Materials Processing Technology, 2008,197( I/2/3 ) : 109 -115. 被引量:1
  • 4Oetselev Z N. Casting in an electromagnetic mold [J ]. Journal of Metals, 1971,10:38 - 43. 被引量:1
  • 5Vives C. Electromagnetic refining of aluminum alloys by the CREM process, part i: working principle and metallurgical results[J ]. Metallurgical and Materials Transactions B, 1989,20(5) :623 - 629. 被引量:1
  • 6左玉波,崔建忠,赵志浩,朱庆丰.低频电磁铸造7050铝合金的组织与性能[J].东北大学学报(自然科学版),2008,29(1):77-80. 被引量:8
  • 7左玉波..超高强铝合金DC铸造组织电磁调控工艺与理论研究[D].东北大学,2007:
  • 8韩至成著..电磁冶金学[M].北京:冶金工业出版社,2001:400.
  • 9戴锅生..传热学[M],1999.
  • 10张北江..低频电磁场作用下铝合金半连续铸造工艺与理论研究[D].东北大学,2002:

二级参考文献10

  • 1赵志浩,崔建忠,左玉波,张海涛.低频电磁场对水平半连续铸造7075铝合金的影响[J].东北大学学报(自然科学版),2005,26(1):51-54. 被引量:6
  • 2Morris A.Aluminum alloys for aerospace[J].Materials World,1998,6(7):407-408. 被引量:1
  • 3Abdel-Hamid A A.Effect of other elements on the grain refinement of Al by Ti or Ti and B.Part 1.a critical review[J].Zeitschrift fur Metallkunde,1989,80(8):566-569. 被引量:1
  • 4Yücel B.Grain refining efficiency of Al-Ti-C alloys[J].Journal of Alloys and Compounds,2006,422(1/2):128-131. 被引量:1
  • 5Zuo Y B,Cui J Z,Dong J,et al.Effect of low frequency electromagnetic field on the constituents of a new superhigh strength aluminum alloy[J].Journal of Alloys and Compounds,2005,402:149-155. 被引量:1
  • 6Dong J,Cui J Z,Yu F X,et al.Effect of low-frequency electromagnetic casting on the castability,microstructure,and tensile properties of direct-chill cast Al-Zn-Mg-Cu alloy[J].Metallurgical and Materials Transactions A,2004,35:2487-2494. 被引量:1
  • 7Zuo Y B,Cui J Z,Dong J,et al.Effect of low frequency electromagnetic field on the as-cast microstructures and mechanical properties of superhigh strength aluminum alloy[J].Materials Science and Engineering A,2005,408:176-181. 被引量:1
  • 8Zuo Y B,Cui J Z,Zhao Z H,et al.Effect of low frequency electromagnetic field on casting crack during DC casting superhigh strength aluminum alloy ingots[J].Materials Science and Engineering A,2005,406:286-292. 被引量:1
  • 9Robson J D,Prangnell P B.Dispersoid precipitation and process modelling in zirconium containing commercial aluminium alloys[J].Acta Materialia,2001,49(4):599-613. 被引量:1
  • 10Smith B.The Boeing 777[J].Advanced Materials & Processes,2003,9:41-44. 被引量:1

共引文献7

同被引文献39

引证文献2

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部