期刊文献+

不同废纸脱墨制浆性能的研究 被引量:4

Pulping Properties of Waste Papers from Different Sources
下载PDF
导出
摘要 在实验条件下,从灰分与纤维组成等方面对不同废纸进行了比较分析,研究了不同废纸脱墨浆的光学性能、油墨含量、物理强度性能等。研究发现,不含机械浆纸的白度高,其成浆残余油墨最低,尘埃少,强度相对要好,能满足配抄白度为85%文化纸生产要求。含机械浆纸脱墨制浆得率高,制浆成本低,但因其脱墨浆固有的低白度、高尘埃,无法满足高比例脱墨浆配抄文化纸生产的要求。 The ash content and fiber components of the waste papers from different sources were compared in the laboratory,the optical properties,ink contents,physical strength properties and pulping yields of the de-inked pulps from the waste papers were studied.The investigation results showed that the waste paper of wood-free grade with high brightness has the lowest ERIC content,fewer dirt,and relatively higher strength,which satisfy the production requirement for fine paper with 85%ISO brightness.Whereas the waste paper of wood-containing grade has higher pulping yield,lower pulping cost,but its low brightness and high dirt properties were unable to meet the production requirements of fine paper when using at a high proportion.
出处 《中国造纸》 CAS 北大核心 2012年第5期9-14,共6页 China Pulp & Paper
基金 863项目(2010GXNSFE013006) 国家水专项项目(2008ZX07317-02-03A2) 广西科技项目(桂科攻11107021-4-5)资助
关键词 废纸 灰分 纤维组成 脱墨制浆 白度 制浆得率 waste paper ash fiber furnish screening DIP pulping brightness strength yield
  • 相关文献

参考文献5

二级参考文献16

共引文献12

同被引文献36

  • 1吴新生,谢益民.基于人工神经网络优化抄纸浆料配比[J].中国造纸,2005,24(5):44-46. 被引量:2
  • 2胡惠仁,李海明,张盆.脱墨浆高白度漂白初步研究[J].中国造纸,2005,24(3):5-7. 被引量:3
  • 3石淑兰,何福望主编.制浆造纸分析与检测[M].北京:中国轻工业出版社,2008. 被引量:21
  • 4詹怀宇.制浆原理与工程[M].北京:中国轻工业出版社,2011. 被引量:3
  • 5徐明.国内外废纸制浆造纸的发展现状[J].江苏造纸,2007(3):17-21. 被引量:6
  • 6顾民达.扩大二次纤维回收利用的对策[J].纸和造纸,2000,19(3). 被引量:1
  • 7A S Smolin,A V Kuleshov,M V Vanchakov. Secondary fibrous materi- als from cardboard and paper production and consumption waste [J]. Russian Journal of General Chemistry,2012,82(5),991-998. 被引量:1
  • 8Okwonna O. The effect of pulping concentration treatment on the prep- erties of microcrystalline cellulose powder obtained from waste paper [J]. Carbohydrate Polymers, 2013, 98(1): 721. 被引量:1
  • 9Mjalli F S, A1-Asheh S, Alfadala H E. Use of artificial neural net- work black-box modeling for the prediction of wastewater treatment plants performance [ J ]. Journal of Environmental Management, 2007, 83(3) : 329. 被引量:1
  • 10Sadeghi B H M. A BP-neural network predictor model for plastic in- jection molding process[ J]. Journal of Materials Processing Technol- ogy, 2000, 103(3) : 411. 被引量:1

引证文献4

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部