期刊文献+

钛专用遮色瓷研制及其性能研究

Synthesis and characterization of titanium opaque porcelain
下载PDF
导出
摘要 采用二氧化锡系微晶玻璃制备低熔钛专用遮色瓷,研究了遮色瓷组成与热膨胀系数的关系,通过对比烧结温度、力学性能与热膨胀系数等性能,最终确定遮色瓷配方和烧结工艺;采用XRD、SEM、细胞毒性和溶血实验分别研究了钛遮色瓷的晶相组成、显微形貌和生物相容性。结果表明所研制的遮色瓷为含有锡石晶体相的微晶玻璃;其最佳烧结温度为780℃;在25~350℃,其平均线热膨胀系数为8.9×10-6/℃;所研制的钛遮色瓷细胞毒性为0级,不引起溶血反应,具有良好的生物相容性。 The titanium opaque porcelain was synthesized through normal melting-derived route using SnO2 glass-ceramic system.The porcelain was characterized by thermal expansion,X-ray diffraction and cytotoxicity tests.The results of XRD showed that the main crystal phase of the opaque porcelain was SnO2.Its' average coefficient of thermal expansion(α25-350) was 8.9×10-6/℃,which was lower than that of bonding porcelain(9.2×10-6/℃) and pure titanium(9.5×10-6/℃).The optimal fusion temperature was 780℃.The methyl thiazolyl tetrazolium assay results demonstrated that the cytotoxicity of the titanium porcelain was ranked as 0.At the same time,the titanium porcelain did not result in hemolysis.It was believed that the titanium opaque porcelain synthesized in this research was a biocompatible material and could be used for dental implant materials.
出处 《功能材料》 EI CAS CSCD 北大核心 2011年第10期1861-1863,1868,共4页 Journal of Functional Materials
基金 国家自然科学基金资助项目(81100789) 中国博士后科学基金资助项目(20100481173) 高等学校博士学科点专项科研基金资助项目(20090095120017) 中国矿业大学青年科研基金资助项目(2009A057)
关键词 遮色瓷 生物相容性 牙科材料 titanium dentin porcelain biocompatibility dental material
  • 相关文献

参考文献15

  • 1郭立童,刘啸晨,高积强,杨建峰,郭天文.钛表面的氧化对钛瓷结合强度的影响[J].无机材料学报,2009,24(5):915-918. 被引量:7
  • 2Ozcan I, Hakan U. [J]. Dent Mater, 2005,21 (8) : 773-779. 被引量:1
  • 3Guo L T,Liu X C,He Z Y,et al. [J]. Mater Lett,2008,62 (14) :2204-2206. 被引量:1
  • 4Zhang H,Guo T W, Song Z X, et al. [J]. Surf & Coat Tech, 2007,201 (9-11 ) : 5637-5640. 被引量:1
  • 5Guo L T,Liu X C,Gao J Q, et al. [J]. Mater Manu & Proc,2010,25(8) :710-717. 被引量:1
  • 6ISO Standard 10993-12. Biological Evaluation of Medical Apparatus: Preparation of Reference Samples and Matri- als. 被引量:1
  • 7ISO 7405,Dentistry-Preclinical Evaluation of Biocompati- bility of Medical Devices Used in Dentistry-test Methods for Dental Materials, 1997(E). 被引量:1
  • 8ISO 9693, Metal-ceramic Dental Restorative Systems, 1999. 被引量:1
  • 9ISO 6872,Dental Ceramic,1995. 被引量:1
  • 10西北轻工业学院.玻璃工艺学[M].北京:中国轻工业出版社,2006. 被引量:29

二级参考文献13

共引文献34

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部