Experimental Investigation on the Properties of Manganese Phosphate Coating on AISI D2 Tool Steel 被引量：1

Experimental Investigation on the Properties of Manganese Phosphate Coating on AISI D2 Tool Steel

下载PDF

导出

作者 Anant K. Arulmozhi Ilaiyavel S Aditya Sai. V. Neethi Murali Venkatesan A

机构地区 Department of Mechanical Engineering Department of Chemical Engineering

出处《材料科学与工程（中英文版）》 2011年第4期455-461,共7页 Journal of Materials Science and Engineering

关键词 AISI 润滑性能工具钢磷化膜扫描电子显微镜锰实验金属表面处理 Pre-treatment, surface roughness, corrosion resistance, oil retaining and adhesive properties.

分类号 TG142.45 [一般工业技术—材料科学与工程] TF746 [金属学及工艺—金属材料]

引文网络
相关文献

参考文献17

1S. Jegannathan, Evaluation of the corrosion resistance of phosphate coatings obtained by anodic electrochemical treatment, Elsevier Progress in Organic Coatings 57 (2006) 392. 被引量：1
2S. Prabhu, Analysis of surface characteristics of AISI D2 tool steel material using carbon nano tube, International Journal of Nanotechnology and Applications 2 (2008) 107-122. 被引量：1
3D.B. Freeman, A Guide to Modem Processes and Practice, Phosphating and Metal Pretreatment, Industrial Press Inc., New York, 1986. 被引量：1
4W. Rausch, The Phosphating of Metals, Finishing Publications Ltd., London, 1990. 被引量：1
5G. Lorin, Phosphating of Metals, Finishing Publications Ltd., London, 1974. 被引量：1
6T.S.N.S. Narayanan, Surface pretreatment by phosphate conversion coatings: a review, Adv. Mater. Sci. 9 (2005) 130-177. 被引量：1
7T.S.N.S. Narayanan, M. Subbaiyan, Overheating-its decisive role in phosphating, Met. Finish. 93 (1) (1995) 30-35. 被引量：1
8S./egannathan, T.S.N.S. Narayanan, K. Ravichandran, S. Rajeswari, Corrosion resistance of phosphate coatings obtained by cathodic electrochemical treatment: role of anode-graphite versus steel, Surf. Coat. Technol. 200 (12-13) (2006) 4117-4126. 被引量：1
9S. Jegannathan, T.S.N. Sankara Narayanan, K. Ravichandran, S. Rajeswari, Performance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion tests, Electrochim. Acta 51 (2005) 247. 被引量：1
10P.K. Sinha, R. Feser, Surface Coating Technology, 161 (2002) 158-162. 被引量：1

同被引文献5

1张青春,赵海丽,陈琦峰,王继良,姜招喜.B7螺杆上的螺纹剥落原因分析[J].理化检验（物理分册）,2008,44(9):521-523. 被引量：2
2蒋佩华,姚志江,陈伟峰,王董平.40Cr螺杆断裂分析[J].钢铁研究,2008,36(6):25-26. 被引量：1
3李勇,高国庆,杨川,杜伟娟.铁路轴承安装时压装力偏低的原因分析[J].轴承,2011(10):37-39. 被引量：1
4张朝磊,刘雅政,周乐育,唐山.热轧材冷拉过程65钢硬线断裂分析[J].特殊钢,2012,33(1):57-59. 被引量：3
5周健,马党参,刘宝石,康爱军,李向阳.H13钢带状偏析演化规律研究[J].钢铁研究学报,2012,24(4):47-52. 被引量：44

引证文献1

1蒋佩华,姚志江,许宗凡,王慧.齿轮件端面孔洞原因分析[J].物理测试,2013,31(3):47-50.

1QIN Bin MA Yongzhu JIANG Laizhu.Research on the heat treatment of tool steel 5Cr15MoV[J].Baosteel Technical Research,2011,5(3):51-53. 被引量：1
2牛丽媛.Cathodic phosphate coating containing nano zinc particles on magnesium alloy[J].中国有色金属学会会刊：英文版,2008,18(A01):365-368. 被引量：2
3Meilinda Nurbanasari,Panos Tsakiropoulos,Eric J.Palmiere.Microstructural evolution of a heat-treated H23 tool steel[J].International Journal of Minerals,Metallurgy and Materials,2015,22(3):272-284. 被引量：4
4武传松,张文斌,张志云.Experimental investigation on friction stir welding of 2A12 aluminium alloys[J].China Welding,2011,20(2):7-11. 被引量：1
5TUTAR Mumin,AYDIN Hakan,DURMUS Ali,BAYRAM Ali,YIGIT Kurtulus.The hydro-abrasive erosion wear behavior of duplex-treated surfaces of AISI H13 tool steel[J].Science China(Technological Sciences),2014,57(5):1040-1051.
6G.Sanchez Sarmiento and J. Vega 1.Departamento de Fisica, Facultad de Ingenieria, Universidad de Buenos Aires, Av. Paseo Colon 850. (1063) Buenos Aires, Argentina 2 . Universidad Catolica de Cordoba and SUDOSJLO SA, Cno. San Carlos Kin 4,5. (5000) Cord.Calculation of the Hardness Space Distribution in the As Quenched Condition of a Medium Hardening Tool Steel[J].Journal of Shanghai Jiaotong university(Science),2000,5(1):351-361.
7牛丽媛,林继兴,李勇,史子木,徐临超.Improvement of anticorrosion and adhesion to magnesium alloy by phosphate coating formed at room temperature[J].Transactions of Nonferrous Metals Society of China,2010,20(7):1356-1360. 被引量：8
8冯金峙,金玉昌.表面技术在进口设备零配件修复中的应用[J].冶金设备,1994(5):41-43.
9Kamran Amini,Said Nategh,Ali Shafyei,Ahmad Rezaeian.Effect of deep cryogenic treatment on the properties of 80CrMo12 5 tool steel[J].International Journal of Minerals,Metallurgy and Materials,2012,19(1):30-37. 被引量：2
10Shoudan Lu,Zhenbo Wang and Ke Lu Shenyang National Laboratory for Materials Science,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China.Strain-induced Microstructure Refinement in a Tool Steel Subjected to Surface Mechanical Attrition Treatment[J].Journal of Materials Science & Technology,2010,26(3):258-263. 被引量：7

材料科学与工程（中英文版）

2011年第4期

浏览历史

内容加载中请稍等...

Experimental Investigation on the Properties of Manganese Phosphate Coating on AISI D2 Tool Steel 被引量：1

参考文献17

同被引文献5

引证文献1

相关作者

相关机构

相关主题

浏览历史