期刊文献+

Effects of Technological Parameters on Carbothermal Reduction and Nitridation of Zircon 被引量:3

Effects of Technological Parameters on Carbothermal Reduction and Nitridation of Zircon
下载PDF
导出
摘要 Carbothermal reduction and nitridation (CRN) of zircon ( ZrSiO4 ) permits obtaining diffbrent composites of oxides and nitrides such as ZrO2 -Si2N2O and ZrN - Si3N4. The effects tf technological parameters ( carbon source, reaction temperature, and carbon con.tent ) on the reaction rate and product phase composition of CRN of zircon were investigated by TGA and XRD. The resuhs show that: (1) carbon source is an important factor for a rapid reaction, and actiwtted carbon is chosen as the carbon source considering the expect products and reaction rate ; ( 2 ) reaction tetnperature has vital effect on reaction rate and product. In, case of carbon content above 20% , the zircon phase and m-ZrO2 phase decrease with increasing temperature, while the ZF7N8O4 phase increases firstly and then decreases, and the ZrN phase increases continually; (3) different carbon contents result in different reaction products. The higher the carbon content, the lower the starting temperature for the CRN of zircon. Carbothermal reduction and nitridation (CRN) of zircon ( ZrSiO4 ) permits obtaining diffbrent composites of oxides and nitrides such as ZrO2 -Si2N2O and ZrN - Si3N4. The effects tf technological parameters ( carbon source, reaction temperature, and carbon con.tent ) on the reaction rate and product phase composition of CRN of zircon were investigated by TGA and XRD. The resuhs show that: (1) carbon source is an important factor for a rapid reaction, and actiwtted carbon is chosen as the carbon source considering the expect products and reaction rate ; ( 2 ) reaction tetnperature has vital effect on reaction rate and product. In, case of carbon content above 20% , the zircon phase and m-ZrO2 phase decrease with increasing temperature, while the ZF7N8O4 phase increases firstly and then decreases, and the ZrN phase increases continually; (3) different carbon contents result in different reaction products. The higher the carbon content, the lower the starting temperature for the CRN of zircon.
出处 《China's Refractories》 CAS 2011年第1期6-10,共5页 中国耐火材料(英文版)
基金 the Natural Science Foundation of The Education Department of Henan Province,No.2011B430011 the SRTP of Henan University of Science and Technology
关键词 ZIRCON Carbothermal reduction and nitri-dation Carbon source Reaction temperature Carbon content Zircon, Carbothermal reduction and nitri-dation, Carbon source, Reaction temperature, Carbon content
  • 相关文献

参考文献2

二级参考文献8

共引文献16

同被引文献9

引证文献3

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部