期刊文献+

二段高低浓磨浆对杨木PRC-APMP浆成纸性能的影响 被引量:2

Effects of High and Low Consistency Refining at the Secondary Stage of Aspen PRC-APMP on Paper Properties
原文传递
导出
摘要 以一段磨后杨木PRC-APMP浆为原料,采用ZSP-300磨浆机在25%和4.5%的浆浓下磨浆,探讨二段高浓磨浆和低浓磨浆对成纸性能的影响。结果表明:相比于二段高浓磨浆,二段低浓磨浆纤维的长度较短,细小组分含量较多,浆料中纤维束的含量较低。同时,对成纸松厚度与强度变化具有显著的不同步性。当游离度为480mL,相比于高浓磨浆,低浓磨浆成纸的松厚度下降4%,而成纸的抗张指数和内结合强度分别提高18%和12%。可见,采用二段低浓磨浆,可在略微降低成纸松厚度损失的同时,显著提高成纸的抗张强度和内结合强度,缓和化机浆应用时成纸松厚度与强度的矛盾。另一方面,二段低浓磨浆能较好地保留杨木PRC-APMP浆成纸的光学性能。 At the secondary stage refining, paper properties of high consistency (25%) and low consistency (4.5%) refining were studied with the raw material of aspen PRC-APMP obtained after the first stage refining.The results showed that at the secondary stage of low consistency refining, fiber length was shorter and the content of fines fraction was larger. At the same time, the content of shives was lower compared to the high consistency refining. In addition, the changes of paper bulk and strengths properties were asynchronous dramatically. At the freeness of 480mL, paper bulk decreased by 4% while the tensile index and internal bond strength were increased 18% and 12% respectively. erefore, the balance between paper bulk and strength was obtained by slightly reducing the loss of paper bulk and obviously improving the tensile index and internal bond strength at the secondary stage of low consistency refining. Meanwhile, optical properties of aspen paper were better kept by low consistency refining.
机构地区 陕西科技大学
出处 《纸和造纸》 北大核心 2011年第3期4-6,共3页 Paper and Paper Making
基金 国家科技支撑项目"速生材高得率在高档纸板中的应用技术" 课题编号:2006BAD32B05-2
关键词 杨木PRC-APMP 低浓磨浆 高浓磨浆 强度 松厚度 Aspen APMP low consistency refining high consistency refining strength bulk
  • 相关文献

参考文献4

二级参考文献8

  • 1万金泉,陈中豪.磨浆对化机浆特性的影响[J].纸和造纸,1994,13(4):41-42. 被引量:3
  • 2周亚军,张栋基,李甘霖.漂白高得率化学机械浆综述[J].中国造纸,2005,24(5):51-60. 被引量:84
  • 3E. C Xu, et al. Some Latest Developments In Alkali Peroxide Mechanical Pulping, Part 2: Low Consistency Secondary Refining.P&P C,2003, 104(10) :47 ~51 被引量:1
  • 4Wei Su, Jeffery Hsieh. The effect of TMP refining using an adjustable-speed drive on energy consumption and pulp quality [ J ]. Tappi J. , 1994, 77(9) : 111. 被引量:1
  • 5Miles K B, Karnis. Refining intensity energy consumption and pulp quality in two-stage chip refining[J]. Tappi J., 1991,74(3) : 222. 被引量:1
  • 6Petri P Karenlampi. The effect of pulp fiber properties on the tearing work of paper[ J]. Tappi Journal, 1996, 79 (4) : 211. 被引量:1
  • 7Rajinder S Seth. Implications of the single-ply elmendorf tear strength test for characterizing pulps[J]. Tappi Journal, 1991,74(8) : 109. 被引量:1
  • 8谢澄,陈中豪.磨浆对兰桉APMP浆特性的影响[J].广东造纸,2000(3):14-16. 被引量:3

共引文献1

同被引文献13

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部