期刊文献+

Grain refinement and mechanism of CAl_(0.5)W_(0.5) compound in Mg-Al alloys

Grain refinement and mechanism of CAl_(0.5)W_(0.5) compound in Mg-Al alloys
下载PDF
导出
摘要 The effect of CAl0.5W0.5(CAW) compound on the grain refinement of Mg-Al based alloys was investigated.The results show that CAW compound is an effective and active grain refiner.The grain size of binary Mg-Al alloys is more than 500 μm,and it is changed to about 110 μm with a 1 wt.% CAW addition.The hardness increased with the decease of grain size monotonously.The mechanical properties are improved by the addition.The fine grain size is mainly ascribed to the dispersed Al2CO particles,which are very potent nucleating substrates for Mg-Al alloys.The nucleation cores formed by chemical reaction directly are well-distributed in the matrix. The effect of CAl0.5W0.5(CAW) compound on the grain refinement of Mg-Al based alloys was investigated.The results show that CAW compound is an effective and active grain refiner.The grain size of binary Mg-Al alloys is more than 500 μm,and it is changed to about 110 μm with a 1 wt.% CAW addition.The hardness increased with the decease of grain size monotonously.The mechanical properties are improved by the addition.The fine grain size is mainly ascribed to the dispersed Al2CO particles,which are very potent nucleating substrates for Mg-Al alloys.The nucleation cores formed by chemical reaction directly are well-distributed in the matrix.
出处 《Rare Metals》 SCIE EI CAS CSCD 2010年第6期630-634,共5页 稀有金属(英文版)
基金 supported by the Doctoral Foundation of Henan Polytechnic University (No.648248) the Science and Technology Program of Changchun (No.05GG54)
关键词 magnesium alloys grain refinement REFINER MECHANISM mechanical properties magnesium alloys grain refinement refiner mechanism mechanical properties
  • 相关文献

参考文献17

  • 1Inoue A., Kawamura Y., Matsushita M., Hayashi K., and Koike J., Novel hexagonal structure and ultrahigh strength of magnesium solid solution in the Mg-Zn-Y system, J. Mater. Res., 2001, 16: 1894. 被引量:1
  • 2Socjusz-Podosek M. and Litynska L., Effect of yttrium on structure and mechanical properties of Mg alloys, Mater. Chem. Phys., 2003, 8Q: 472. 被引量:1
  • 3Qian M., St.lohn D.H., and Frost M.T., Heterogeneous nuclei size in magnesium-zirconium alloys, Scripta Mater., 2004, 50: 1115. 被引量:1
  • 4Qian M., StJohn D.H., and Frost M.T., Characteristic zirco- nium-rich coring slructures in Mg-Zr alloys, Scripta Mater., 2002, 46: 649. 被引量:1
  • 5Watanabe H., Mukai T., Kamado S., Kojima Y., and Higashi K., Mechanical properties of Mg-Y-Zn alloy processed by equal-channel-angular extrusion, Mater. Trans., 2003, 44: 463. 被引量:1
  • 6Motegi T., Yano E., Tamura Y., and Sato E., Clarification of grain refining mechanisms of superheat-treated Mg-AI-Zn alloy castings, Mater. Sei. Forum, 2000, 350-351: 191. 被引量:1
  • 7Cao P., Qian M., and StJohn D.H., Effect of iron on grain refinement of high-purity Mg-A1 alloys, Seripta Mater., 2004, 51: 125. 被引量:1
  • 8Cao P., Qian M., and StJohn D.H., Grain coarsening of magnesium alloys by beryllium, Scripta Mater., 2004, 51: 647. 被引量:1
  • 9Polmear I.J., Light Alloys: from Traditional Alloys to Nanocrystals, Butterworth-Heinemann Press, Sydney, 2006: 253. 被引量:1
  • 10Lee Y.C., Dahle A,K., and StJohn D.H., The role of solute in grain refinement of magnesium, Metall. Mater. Trans. A, 2000, 31: 2895. 被引量:1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部