期刊文献+

电控喷油器关键结构参数正交试验优化设计 被引量:5

Optimized design of key structural parameter of common rail injector by orthogonal simulation
下载PDF
导出
摘要 介绍了用于分布式共轨系统的新型电控喷油器的工作原理及特点,利用Amesim软件建立了该喷油器的仿真计算模型,以喷油器的响应特性和入口端的压力波动为评价指标。根据新型电控喷油器的结构特点,提出了5个无因次量,分析了这5个无因次量对其性能的影响,并利用正交表对影响因素的大小排序,优选出关键结构参数的方案,由于提出的5个无因次量具有普遍性和通用性,所以该结果为今后电控喷油器结构设计中性能主次影响因素的选择提供了依据,保证了喷油器良好的性能。 Operation principle and characteristic of a new type common rail injector used in distributed common rail system were introduced in this paper.Numerical model of the injector was built based on Amesim software.Characters of response and pressure fluctuate of the inlet were as evaluation target.To analyze the effects of too many related structure parameters on injector performance,5 non-dimensional parameters have been set.Orthogonal test method was used in simulation.Orthogonal array was used to estimate the degree of influence caused by each parameter.Because of the universality and currency of the5 non-dimensional parameters,this optimize result could be a design basis for further injector parameter trade-off,performance of the injector was ensured.
出处 《舰船科学技术》 2010年第8期53-56,62,共5页 Ship Science and Technology
关键词 共轨系统 电控喷油器 AMESIM 正交试验 common rail electronic controlled injector Amesim orthogonal test
  • 相关文献

参考文献10

二级参考文献13

  • 1陆威崙.新一代MTU2000共轨系统柴油机[J].柴油机,2005,27(3):1-3. 被引量:2
  • 2Dipl.-lng. Jaroslav Hlousek etc, Common Rail System for Large Diesel Engines [ R ]. CIMAC Congress 2004, Paper No. 117. 被引量:1
  • 3Mr. Gunnar Stiesch, Utilizing Multiple Injections for Optimized Performance and Exhaust Emissions with the MTU Series 2000 Common Rail Marine Engines [ R ]. CIMAC Congress 2007 ,Paper No. 50. 被引量:1
  • 4AMESim and Common Rail type Injection Systems [ R ]. AMESim Technical Bulletin 110. 被引量:1
  • 5Dr. Rainer W. Jorach, etc. The Upcoming Generation of Common Rail Injection Systems for Large Bore Engines from L'orange GmbH[C]//ICEF2002-479. 被引量:1
  • 6Mr. Marco Ganser. New Common Rail Systems suited for Diesel Engines from 1 to 5 Megawatt: modeling simulations and hardware results[C]//CIMAC Congress 2007. 被引量:1
  • 7Marco Coppo, Claudio Dongiovanni. Numerical Analysis and Experimental Investigation of a Common Rail-Type Diesel Injectior[C]//ASME 2004. 被引量:1
  • 8AMESim and Common Rail type Injection Systems[R]. AMESim Technical Bulletin 110. 被引量:1
  • 9Dipl-lng. Jaroslav Hlousek, etc. Common Rail System for Large Diesel Engmes[C]//CIMAC Congress 2004. 被引量:1
  • 10徐家龙,油泵油嘴技术,1986年,2期,1页 被引量:1

共引文献162

同被引文献40

引证文献5

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部