期刊文献+

7075铝合金循环载荷下残余应力松弛的实验研究 被引量:5

Experimental Study of Residual Stress Relaxation of 7075 Aluminum Alloy under Cyclic Loading
下载PDF
导出
摘要 采用淬火和喷砂2种强化工艺引入残余应力,分析循环应力作用下7075铝合金应力松弛现象。基于应力松弛机理讨论了2种不同强化工艺下残余应力松弛规律的异同。结果表明,加载应力状态与大小、残余应力的初始分布和冷作硬化是影响残余应力松弛的主要因素。 Residual stresses of 7075 aluminum alloy were introduced by quenching and shot peening strengthening processes in order to clarify the residual stress relaxation mechanism and laws. And differences of residual stress relaxations under different strengthening technologies were discussed. The resuhs show that state and magnitude of the applied stress, initial distribution of the residual stress and cold working have great influences on stress relaxation. Structural residual stress introduced by quenching relaxes a little under cyclic loading while the stress induced by shot peening relaxes a lot on the same cyclic stress scale.
出处 《中国材料进展》 CAS CSCD 2010年第6期50-54,共5页 Materials China
基金 国家重点基础研究发展规划项目973项目(2005CB623708)
关键词 7075铝合金 残余应力 应力松弛 淬火强化 喷砂强化 7075 aluminum alloy residual stress stress relaxation quenching shot peening
  • 相关文献

参考文献15

  • 1Smith D J,Farrahi G H,Zhu W X,et al.Experimental Measurement and Finite Element Simulation of the Interaction between Residual Stresses and Mechanical Loading[J].International Journal of Fatigue,2001,23:293-302. 被引量:1
  • 2Wang Yanan(王亚男),Chen Shujiang(陈树江),Dong Xichun(董希淳).Dislocation Theory and Its Applications(位错理论及其应用)[M].Beijing:China National Metallurgy Industry Press,2007. 被引量:1
  • 3Rao D,Wang D,Chen L,et al.The Effectiveness Evaluation of 314L Stainless Steel Vibratory Stress Relief by Dynamic Stress[J].International Journal of Fatigue,2007,29:192-196. 被引量:1
  • 4Zhuang W Z,Halford G R.Investigation of Residual Stress Relaxation under Cyclic Load[J].International Journal of Fatigue,2001,23:S31-S37. 被引量:1
  • 5朱伟,彭大暑,张辉,杨立斌,林高用.7075铝合金厚板淬火残余应力消除工艺的研究[J].铝加工,2002,25(2):12-14. 被引量:13
  • 6Shinde Sachin R,Hoeppner David W.Fretting Fatigue Behavior in 7075-T6 Aluminum Alloy[J].Wear,2006,261:426-434. 被引量:1
  • 7Benedetti M,Fontanari V,Scardi P,et al.Reverse Bending Fatigue of Shot Peened 7075-T651 Aluminum Alloy:The Role of Residual Stress Relaxation[J].International Journal of Fatigue,2009,31:1 125-1 236. 被引量:1
  • 8吴运新,廖凯.铝合金厚板拉伸过程横向残余应力消减分析[J].材料工程,2009,37(10):45-48. 被引量:14
  • 9Prime M B,Hill M R.Residual Stress,Stress Relief,and Inhomogeneity in Aluminum Plate[J].Scripta Materialia,2002,46(1):77-82. 被引量:1
  • 10Kocks U F.Laws for Work-Hardening and Low-Temperature Creep[J].Journal of Engineering Materials and Technology,1976,98:76-85. 被引量:1

二级参考文献15

共引文献36

同被引文献19

引证文献5

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部