期刊文献+

Microstructure and magnetic properties of Fe-Co-Nd-Y-B alloys obtained by suction casting method 被引量:1

Microstructure and magnetic properties of Fe-Co-Nd-Y-B alloys obtained by suction casting method
下载PDF
导出
摘要 The phase composition, magnetic properties i.e. coercivity and the magnetic polarization at room temperature for the bulk Fe67Co5Nd3Y6B19 and Fe64Co5Nd6Y6B19 alloys were studied. The bulk amorphous Fe67CosNd3Y6B19 alloy, inhomogeneous in the as-quenched state, crystallized after annealing at 948 K for 0.5 h and consisted of Nd2Fe14B-type, Fe2B and paramagnetic phases. The rapidly solidified Fe64Co5Nd6Y6B19 alloy contained the Nd2Fel4B-type and paramagnetic phases. The annealing of the bulk Fe67CosNd3Y6B19 alloy at 948 K for 0.5 h led to hard magnetic properties. However, the bulk Fe64Co5Nd6Y6B19 alloy exhibited good hard magnetic properties directly after preparation. The phase composition, magnetic properties i.e. coercivity and the magnetic polarization at room temperature for the bulk Fe67Co5Nd3Y6B19 and Fe64Co5Nd6Y6B19 alloys were studied. The bulk amorphous Fe67CosNd3Y6B19 alloy, inhomogeneous in the as-quenched state, crystallized after annealing at 948 K for 0.5 h and consisted of Nd2Fe14B-type, Fe2B and paramagnetic phases. The rapidly solidified Fe64Co5Nd6Y6B19 alloy contained the Nd2Fel4B-type and paramagnetic phases. The annealing of the bulk Fe67CosNd3Y6B19 alloy at 948 K for 0.5 h led to hard magnetic properties. However, the bulk Fe64Co5Nd6Y6B19 alloy exhibited good hard magnetic properties directly after preparation.
出处 《Journal of Rare Earths》 SCIE EI CAS CSCD 2009年第4期680-683,共4页 稀土学报(英文版)
基金 supported by the grants PBZ-MEiN/01/2006/09 (M. Hasiak) PBZ-KBN-115/T08/04 (J. Kaleta)
关键词 Moessbauer spectroscopy bulk alloys rare earth hard magnetic materials Moessbauer spectroscopy bulk alloys rare earth hard magnetic materials
  • 相关文献

参考文献2

共引文献9

同被引文献9

  • 1L. L. Gao,X. H. Cheng.Effect of ECAE on Microstructure and Tribological Properties of Cu–10%Al–4%Fe Alloy[J]. Tribology Letters . 2007 (2) 被引量:1
  • 2C. Vilarinho,J.P. Davim,D. Soares,F. Castro,J. Barbosa.Influence of the chemical composition on the machinability of brasses[J]. Journal of Materials Processing Tech. . 2005 (1) 被引量:1
  • 3Hüseyin Turhan.Adhesive wear resistance of Cu–Sn–Zn–Pb bronze with additions of Fe, Mn and P[J]. Materials Letters . 2004 (12) 被引量:1
  • 4Tanel Telliskivi.Simulation of wear in a rolling–sliding contact by a semi-Winkler model and the Archard’s wear law[J]. Wear . 2003 (7) 被引量:1
  • 5M. Kaplan,A.K. Yildiz.The effects of production methods on the microstructures and mechanical properties of an aluminum bronze[J]. Materials Letters . 2003 (28) 被引量:1
  • 6L. Dubourg,F. Hlawka,A. Cornet.Study of aluminium–copper–iron alloys: application for laser cladding[J]. Surface & Coatings Technology . 2002 被引量:1
  • 7Yuanyuan Li,Tungwai Leo Ngai,Wei Xia.Mechanical, friction and wear behaviors of a novel high-strength wear-resisting aluminum bronze[J]. Wear . 1996 (1) 被引量:1
  • 8Z. Shi,A. Bloyce,Y. Sun,T. Bell.Influence of surface melting on dry rolling-sliding wear of aluminium bronze against steel[J]. Wear . 1996 (1) 被引量:1
  • 9李文生,刘毅,王智平,马超,王顺才.Effects of Ce in novel bronze and its plasma sprayed coating[J].Transactions of Nonferrous Metals Society of China,2012,22(9):2139-2145. 被引量:6

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部