摘要
文章对一种新型无导板化金刚石链锯进行空转实验和锯切石材实验,研究发现,这种金刚石链锯空转及锯切石材功耗较小,且具有较高的锯切效率:Φ500链轮锯切大理石效率为1.9m2/h,锯切花岗石达到0.6m2/h。最后通过实验与理论计算得出节块寿命为56m2/m,链条寿命为73h/m,由此推算出链条理论复焊次数为2次。
In this paper, it has found the new diamond chain saw has lower power consumption and higher cutting efficiency by the idling and cutting test. For example, the cutting efficiency of Ф500mm chain wheel for cutting marble is 1.9m^2/h and for granite it can reach 0. 6m^2/h. Finally, from experiments and calculation in theory, it was obtained that the segment＇s life is 56m^2/m, the chain＇s life is 73h/m, and the chain can be repeat- edly welded at least 2 times.
出处
《超硬材料工程》
CAS
2009年第3期34-38,共5页
Superhard Material Engineering
基金
广西区青年基金
项目编号:桂科青0832086
关键词
金刚石链锯
锯切效率
使用寿命
diamond chain saw
cutting efficiency
working life
