摘要本文简要介绍了线路板碱性蚀刻废液循环再生技术,分析了其原理和效率。This paper described treatment technology in PCB spent etching cyclic regeneration, analyzed its technical characteristics and efficiency.
5O A Fouad, S M Abdel Basir. Cementation - induced recovery of self - assembled uhrafine copper powders from spent etching solutions of printed circuit boards [J]. Powder Technology, 2005, 159(3): 127 ~134. 被引量：1
6Qian Yang, N M Kocherginsky. Copper recovery and spent ammoniacal etchant regeneration based on hollow fiber supported liquid membrane technology : From bench - scale to pilot - scale tests [ J ]. Journal of Membrane Science, 2006, 286:301 - 309. 被引量：1
7J - C Leea, T Zhub, M K Jhaa. Solvent extraction of Cu (I) from waste etch chloride solution using tri - butyl phosphate (TBP) diluted in 1 - octanol [ J ]. Separation and Purification Technology, 2008, 62:596 ~ 601. 被引量：1
8Archana Agrawal, S Kumari, K K Sahu. Iron and copper recovery/removal from industrial wastes: A review [ J ]. Ind. Eng. Chem. Res. 2009, 48, 6145-6161. 被引量：1
9George Kyuchoukov, Mariusz B Bogacki, Jan Szymanowski. Copper extraction from ammoniacal solutions with LIX84 and LIX54[J]. Ind. Eng. Chem. Res. 1998, 37 ( 1 ) : 4084 ~ 4089. 被引量：1
10Mehmet Kul, Umit Cetinkaya. Recovery of copper by LIX 984N- C from electroplating rinse bath solution[ J]. Hydrometallurgy, 2009 : 86 ~ 91. 被引量：1
