期刊文献+

A novel MEMS inertial sensor with enhanced sensing capacitors 被引量:1

A novel MEMS inertial sensor with enhanced sensing capacitors
原文传递
导出
摘要 A novel MEMS inertial sensor with enhanced sensing capacitors is developed. The designed fabricated process of the sensor is a deep RIE process, which can increase the mass of the seismic to reduce the mechanical noise, and the designed capacitance sensing method is changing the capacitance area, which can reduce the air damping between the sensing capacitor plates and reduce the requirement for the DRIE process precision, and reduce the electronic noise by increasing the sensing voltage to improve the resolution. The design and simulation are also verified by using the FEM tool ANSYS. The simulated results show that the transverse sensitivity of the sensor is approximately equal to zero. Finally, the fabricated process based on silicon-glass bonding and the preliminary test results of the device for testing grid capacitors and the novel inertial sensor are presented. The testing quality factor of the testing device based on the slide-film damping effect is 514, which shows that the enhanced capacitors can reduce mechanical noise. The preliminary testing result of the sensitivity is 0.492pf/g. A novel MEMS inertial sensor with enhanced sensing capacitors is developed. The designed fabricated process of the sensor is a deep RIE process, which can increase the mass of the seismic to reduce the mechanical noise, and the designed capacitance sensing method is changing the capacitance area, which can reduce the air damping between the sensing capacitor plates and reduce the requirement for the DRIE process precision, and reduce the electronic noise by increasing the sensing voltage to improve the resolution. The design and simulation are also verified by using the FEM tool ANSYS. The simulated results show that the transverse sensitivity of the sensor is approximately equal to zero. Finally, the fabricated process based on silicon-glass bonding and the preliminary test results of the device for testing grid capacitors and the novel inertial sensor are presented. The testing quality factor of the testing device based on the slide-film damping effect is 514, which shows that the enhanced capacitors can reduce mechanical noise. The preliminary testing result of the sensitivity is 0.492pf/g.
出处 《Journal of Semiconductors》 EI CAS CSCD 北大核心 2009年第5期36-42,共7页 半导体学报(英文版)
基金 supported by the National Natural Science Foundation of China(No.60506015) the Zhejiang Provincial Natural Science Foundation of China(No.Y107105)
关键词 capacitive accelerometer inertial sensor high precision DRIE capacitive accelerometer inertial sensor high precision DRIE
  • 相关文献

参考文献1

二级参考文献10

  • 1Linxi Dong,et al. Effects of non-parallel combs on reliable operation conditions of capacitive inertial sensor for step and shock signals[ J ]. Sensors and Actuators A, 2005, 121 ( 2). 395 -404. 被引量:1
  • 2Bao Minhang. Handbook of sensors and actuators series:Micro Mechanical Transducer[ M ]. Elsevier, 2000.123 - 150. 被引量:1
  • 3FEH Tay ,et al. The effects of non-parallel plates in a differential capacitive microaccelerometer[ J]. Journal of Micromechanics and Microengineering, 1999,9(4) :283 - 293. 被引量:1
  • 4Chabloz M, et al. A mechod to evade microloading effect in deep reactive ion eching for anodically bonded glass-silicon structures[ A]. Proceeding of IEEE Micro ElectroMechanical System Workshop ( MEMS' 00) [ C ]. Miyazaki, japan, 2000.283 - 287. 被引量:1
  • 5T B Gabrielson.Mechanical-thermal noise in micromachined acoustic and vibration sensors[ J]. IEEE Transaction on Electron Devices, 1993,40(5) :903 - 909. 被引量:1
  • 6L A Rochal, et al. Measuring and interpreting the mechanicalthermal noise spectrum in a MEMS [ J ]. Journal of Micromechanics and Microengineering, 2005,15(7) .30 - 38. 被引量:1
  • 7Haluk Kulah, et al. Noise analysis and characterization of a sigma-delta capacitive microaccelerometer [ J ]. IEEE Journal of Solid-State Circuits, 2006,41 (2) : 352 - 361. 被引量:1
  • 8Ki-Ho Han, et al. Self-balanced navigation-grade capacitive microaccelerometers using branched finger electrodes and their performance for varying sense voltage and pressure[ J ]. Journal of Mi Systems,2003,12(1):11-20 被引量:1
  • 9Lufeng Che, et al. Effects of bias voltage polarity on differential capacitive sensitive devices[ J]. Sensors and Actuators A, 2004, 112(2 - 3) :253 - 261. 被引量:1
  • 10Yuh-Chung Hu. Closed form solutions for the pull-in voltage of micro curled beams subjected to electrostatic loads [ J ]. Journal of Micromechanics and Microengineering, 2006, 16 (3) :648 - 655. 被引量:1

共引文献11

同被引文献11

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部