摘要
８０份聚对苯二甲酸丁二酯（ＰＢＴ）和２０份热塑性聚酰胺弹性体（ＴＰＡＥ）分别与９种含有环氧基（—ＧＭＡ）或无水马来酸酐基（—ＭＡＨ）或酯基的增容剂及它们的复合物进行熔融共混，得到ＰＢＴ／ＴＰＡＥ／增容剂合金。用动态粘弹性温度曲线、ＤＳＣ曲线、扫描电镜观察表明，含—ＧＭＡ或—ＭＡＨ或两者共存的增容剂能使ＰＢＴ与ＴＰＡＥ间的相互作用增强，使ＴＰＡＥ在ＰＢＴ中的分散更加均匀，但对软化温度影响很小。
Poly(butylene terephalate)(PBT)/thermoplastic polyamide elastomers(TPAE)/compatibilizers alloys were prepared when PBT/TPAE (80/20) blend was melt-mixed with nine kinds of compatibilizers and its compounds,respectively.The study on the alloys by scanning electron microscope,differential scanning calorimetry,and dynamic mechanical analysis showed that the addition of compatibilizers which contain -GMA or -MAH or both of them enhanced the interfacial strength between PBT and TPAE,and improved the dispersion of TPAE in PBT,but hardly affected on the softening temperature.
出处
《合成橡胶工业》
CAS
CSCD
1998年第3期164-167,共4页
China Synthetic Rubber Industry
基金
国家教委基金
关键词
PBT
热塑性
聚酰胺弹性体
增容剂
共混
分散形态
poly(butylene terephalate)
thermoplastic polyamide elastomer
compatibilizer
morphology of polymer
softening temperature
