期刊文献+

载荷对面接触摩擦副粉末润滑膜影响的实验研究 被引量:3

Influence of the load on powder lubrication film in plane contact
下载PDF
导出
摘要 文章利用石墨粉末颗粒,基于端面摩擦实验机对粉末润滑的特性进行了摩擦学研究。重点探索了载荷变化时粉末膜的形成和渐变破坏过程,并利用光学显微镜对表面膜进行了观察;结果表明粉末润滑膜可以在一定载荷范围内长时间保持完整,实现良好润滑,并随载荷的增加逐渐表现出破坏现象。 The properties of powder lubrication film are investigated based on the plane contact tribotester. The research focuses on the formation and collapse process of the graphite powder lubrication film with the variation of load. The friction surface and powder film are observed by the optical microscope. The results indicate that the powder lubrication film can remain in good state for a long time within certain load and present satisfying lubrication characteristics. With the increasing of load, the film gradually starts to collapse.
出处 《合肥工业大学学报(自然科学版)》 CAS CSCD 北大核心 2009年第3期363-365,共3页 Journal of Hefei University of Technology:Natural Science
基金 国家自然科学基金资助项目(50775060) 合肥工业大学基金和研究生创新基金
关键词 石墨粉 粉末膜 润滑 面接触 graphite powder powder film lubrication plane contact
  • 相关文献

参考文献8

  • 1薛群基,吕晋军.高温固体润滑研究的现状及发展趋势[J].摩擦学学报,1999,19(1):91-96. 被引量:105
  • 2Higgs C F, Heshmat C A, Heshmat H. Comparative evaluation of MoS2 and WS2 as powder lubricants in high speed, multi-pad journal bearings[J]. Journal of Tribology, 1999, 121(3): 625--630. 被引量:1
  • 3王伟,刘小君,焦明华,李红献,刘焜.基于面接触的粉末润滑实验研究[J].润滑与密封,2007,32(11):173-176. 被引量:3
  • 4Reddy N S K, Rao P V. Experimental investigation to study the effect of solid lubrication on cutting forces and surface quality in end milling [J]. International Journal of Machine Tools & Manufacture, 2006, 46(2):189--198. 被引量:1
  • 5Gopal A V, Rao P V. Performance improvement of grinding of SiC using graphite as a solid lubrication [J]. Materials and Manufacturing Processes, 2004, 19(2):177--186. 被引量:1
  • 6Kimura R, Yoshida M, Sasaki G, et al. Characterization of heat insulating and lubricating ability of powder lubricants for clean and high quality die casting[J]. Journal of Materials Processing Technology, 2002, 130(12) :289--293. 被引量:1
  • 7Kaur R G, Heshmat H. 100 turn diameter self-contained solid/powder lubricated auxiliary bearing operated at 30,000 rpm[J]. Lubrication Engineering, 2002, 58 (6):13--20. 被引量:1
  • 8周爱民,陶兴凤,李学忠.固体润滑技术在电厂螺旋输粉机中间轴承上的应用[J].中国设备工程,2003(9):55-56. 被引量:3

二级参考文献33

共引文献105

同被引文献19

引证文献3

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部