期刊文献+

氧分压对Cu-NiFe_2O_4金属陶瓷相成份的影响

Effect of the partial oxygen pressure on Cu-NiFe_2O_4 cermet phase
下载PDF
导出
摘要 用高温固相法合成的NiFe2O4陶瓷粉末,选取Cu为金属陶瓷的金属相成分,研究了氧分压对Cu-NiFe2O4金属陶瓷的相成份的影响,结果表明:当烧结温度为1150℃,氧分压大于2.23Pa时,Cu被大量氧化;氧分压小于4.2×10-3Pa时,Cu和离解的Ni反应生产Cu3.8Ni合金,试样的导电性或抗氧化性都会降低,1150℃下烧结制备Cu-NiFe2O4金属陶瓷的最佳氧分压是(0.3-42.0)×10-2Pa。 The NiFe2O4 cermet powder was fabricated by higher temperature solid state sintering technique. Cu was choosed for metal phase of the cermet and the effect of the NiFe2O4 cermet phase of the partial oxygen pressure were investigated. The resuits show that copper is oxidated when the sintering temperature is 1150℃ and the partial oxygen pressure is higher than 2. 23Pa. Cu reacted with Ni decomposited from NiO synthesized Cu3. 8Ni alloy when the partial oxygen pressure is lower than 4.2 × 10^-3 Pa. The properties of conductivity and oxidation- insisting reduced. The best partial oxygen pressure is ( 0.3 -42.0) × 10^-2pa for the NiFe2O4 cermet powder by higher temperature solid state sintering technique at 1150℃.
作者 张明霞
出处 《低温与超导》 CAS CSCD 北大核心 2009年第2期72-74,共3页 Cryogenics and Superconductivity
关键词 Cu—NiFe2O4金属陶瓷 氧分压 相成份 Cu-NiFe2O4 cermet, Partial oxygen pressure, Phase component
  • 相关文献

参考文献6

二级参考文献34

  • 1张磊,焦万丽,姚广春.NiFe_2O_4惰性阳极的制备及其电解腐蚀机理[J].硅酸盐学报,2005,33(12):1431-1436. 被引量:9
  • 2Suresh S,Mortensen A.李守新译.功能梯度材料基础-制备及热机械行为[M].北京:国防工业出版社,2000.130-150. 被引量:9
  • 3Tabereaux A T.Aluminium Reduction Technology-Where to from Here[J].JOM,2000,52(8):35-39. 被引量:1
  • 4J Thonstad,P Fellner,G M Haarberg.Aluminium Electrolysis:Fundamentals of the Hall-Héroult Process[M].Germany:Aluminium-Verlag,2001.328-339. 被引量:1
  • 5Matsuzaki Y.Thermomechanical Behavior of Functionally Gradient Material for Scramjet Engine Heat Insulation Structure[D].Kyoto,Japan:Kyoto University,1994. 被引量:1
  • 6KENIRY J. The economics of inert anodes and wettable cathodes for aluminum reduction cells [J]. JOM, 2001, 53(5): 43-47. 被引量:1
  • 7NANCY M, JACK E. Inert anode roadmap--A framework for technology development [R]. Washington: The Aluminum Association in Conjunction with the U.S. Department of Energy, 1998. 被引量:1
  • 8OLSEN E, THONSTAD J. Nickel ferrite as inert anodes in aluminum electrolysis (part I): Material fabrication and preliminary testing [J]. Journal of Applied Electrochemistry, 1999, 29: 293-299. 被引量:1
  • 9PAWLEK R P. Inert anodes: An update [C]// TABEREAUX A T. Light Metals 2004. Warreudale PA: TMS, 2004: 283-287. 被引量:1
  • 10LAI Yan-qing, DUAN Hua-nan, LI Jie, SUN Xiao-gang, LIU Ye-xiang. On the corrosion behaviour of Ni-NiO-NiFe2O4 eermets as inert anodes in aluminiurn electrolysis [C]// KVANDE K. Light Metals 2005. Warreudale PA: TMS, 2005: 529-534. 被引量:1

共引文献24

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部