期刊文献+

Stewart台体并联机器人位置正解 被引量:3

Direct kinematics of Stewart mechanism robot
下载PDF
导出
摘要 为获得Stewart台体并联机器人位置正解的解析解,使用分次字典序Groeb-ner基和Sylvester结式相结合的代数方法对该问题进行研究.利用计算代数中的分次字典序Groebner基算法,计算该机器人位置正解封闭数学模型的分次字典序Groebner基;从得出的51个基中选取20个基,构造20阶Sylvester结式,分析符号形式方程组的变量次数,可以直接得出该机器人位置正解一元高次方程的次数为40且最多有40组解的结论,其结果与前人的完全一致,但结式的尺寸却小得多.为了对结果进行验证,使用同伦连续法对同一个数字算例进行计算,两种方法得到结果一致.为并联机构位置正解的研究提供了一种新的有效算法. The Groebner-Sylevester hybrid approach was presented to obtain the closed-form solutions of the direct kinematics of the Stewart mechanism robot. The reduced Groebner basis under degree lexicographic ordering for the closed-form equations was presented based on computer algebra method. And 20 Groebner basis were picked out from the 51 Groebner basis. Then a 20 × 20 dimensional Sylvester's matrix was construeted, which is relatively small in size. And a 40th degree univariate equation was presented from the determinate of the matrix by analyzing the numbers of the variables in the equations. To verify the proposed algorithm, a same numerical example was calculated based on the continuation method as well as the the proposed algorithm. It shows that the proposed algorithm calculates simply and rapidly to lead to the univariate equation. The results both by using the continuation method and based on the proposed algorithm are same. Then a novel and practical algorithm to solve the direct kinematics of the parallel mechanism robot was presented.
出处 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2009年第1期48-51,共4页 Journal of Beijing University of Aeronautics and Astronautics
基金 国家973资助项目(2004CB318000) 国家自然科学基金资助项目(50475161) 国家863计划资助项目(2007AA04Z211)
关键词 并联机构 位置正解 Sylvester结式 parallel mechanisms direct kinematics Sylvester resultant
  • 相关文献

参考文献10

  • 1黄真等著..并联机器人机构学理论及控制[M].北京:机械工业出版社,1997:410.
  • 2Wampler C W. Forward displacement analysis of general six-inparallel SPS (Stewart) platform manipulators using SOMA coor-dinates [ J]. Mech Mach Theory, 1995,31 (3) :331 - 337. 被引量:1
  • 3Raghavan M. The Stewart platform of general geometry has 40 configurations [ J ]. ASME J Mechanical Design, 1993,115 ( 2 ) : 277 - 281. 被引量:1
  • 4Innocenti C ,Castelli V P. Forward kinematics of the general 6-6 fully parallel mechanism:An exhaustive numerical approach via a mono-dimensional-search algorithm [ J ]. ASME J Mech Des, 1993,115(4) :932 -937. 被引量:1
  • 5刘安心,杨廷力.求一般6-SPS并联机器人机构的全部位置正解[J].机械科学与技术,1996,15(4):543-546. 被引量:39
  • 6Innocenti C. Forward kinematics in polynomial form of the general stewart platform [ J ]. ASME Journal of Mechanical Design, 2001,123 ( 2 ) :254 - 260. 被引量:1
  • 7Lee Taeyoung,Shim Jaekyung. Forward kinematics of the general 6-6 Stewart platform using algebraic elimination[ J]. Mech Mach Theory ,2001,36 (4) : 1073 - 1085. 被引量:1
  • 8Dhingra A K,Almadi A N, Kohli D. A groebner-sylvester hybrid method for closed-form displacement analysis of mechanisms [ J ]. ASME Journal of Mechanical Design,2000,122 (4) :431 - 438. 被引量:1
  • 9Craig J J. Introduction to robotics: mechanics and control [ M ]. 3rd Edition. Beijing.. Mechanical Industrial Press,2005:47. 被引量:1
  • 10杨廷力著..机械系统基本理论 结构学·运动学·动力学[M].北京:机械工业出版社,1996:293.

二级参考文献3

共引文献38

同被引文献24

引证文献3

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部