期刊文献+

头孢吡肟E-异构体的合成与含量测定 被引量:2

Synthesis and content determination of cefepime E-isomer
下载PDF
导出
摘要 目的:合成头孢吡肟 E-异构体,并作为工作对照品,建立头孢吡肟中 E-异构体含量的分析方法。方法:采用 RP—HPLC,色谱柱为 Alltima C_(18)(4.6 mm×150 mm,5μm);线性梯度洗脱,流动相 A 为0.057%磷酸二氢铵溶液,流动相 B 为乙腈,25 min 内,流动相 B 由0%增加至25%;流速为1.0 mL·min^(-1);检测波长为254 nm。结果:方法的线性范围为0.2~4.06μg·mL^(-1),线性方程为 Y=-1.3×10~4+9.8×10~4X(r=0.9981),检测限为20.5 ng;平均回收率为99.4%,RSD 1.5%。结论:本法分离效果好,灵敏度高,结果准确、可靠,适合于头孢吡肟中 E-异构体的含量测定。 Objective: To study the synthetic method of cefepime E-isomer and using as work standard, its quantitative method was developed by HPLC in eefepime. Method:The separation was performed on a Alhima C 18 column (4.6 mm×150 mm ,5 μm) ,the mobile phase was composed of 0. 057% ammonium phosphate monobasie and ace-tonitrile with gradient elution. The gradient condition was 0-25 min, aeetonitrile 0%-25%. The flow rate was 1.0 mL·min^-1.The absorbanee was measured at 254 nm. Result:A good linearity was obtained over the range of 0.2-4.06 μg·mL^-1;the regression equation were Y=-1.3× 10^4×9.8×10^4X(r=0.9981),the detection limit was 20.5 ng;the average recovery was 99.4% , RSD 1.5%. Conclusion:The method is proved to be suitable for detecting the content of eefepime E - isomer,which offered the advantages of speeifity, speed and sensitivity.
出处 《药物分析杂志》 CAS CSCD 北大核心 2008年第4期613-615,共3页 Chinese Journal of Pharmaceutical Analysis
关键词 头孢吡肟 E-异构体 合成 含量测定 梯度洗脱 cefepime E-isomer synthesis content determination gradient elution
  • 相关文献

参考文献3

  • 1Japen Antibiotic Research Association (日本抗生物质学术协议会).The Minimum Requirement for Antibiotic Products of Japan(日本抗生物质医药品基准解说).Tokyo(东京):Pharmcy Times Press(药业时报社),1998.145 被引量:1
  • 2王少敏,邹大鹏,张建业,李华雨,刘宏民.高效液相色谱/串联质谱法快速鉴定Z/E盐酸头孢吡肟异构体[J].分析化学,2006,34(9):1278-1282. 被引量:10
  • 3Gary M.F.Lim(加里M.F.林),John M.Roubie(J.M.卢比).Syn -isomer of Thiazolyl Intermediate and Process for the Preparation Thereof(用噻唑基中间体顺式异构体制备头孢菌素抗菌素).CN:1 140 714A,1997 -01 -22 被引量:1

二级参考文献7

共引文献9

同被引文献1957

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部