摘要
微粉末注射成形技术能够生产具有精密微细结构的零件,并使低成本大规模生产得以实现,通过这种技术有望满足微机电系统(MEMS)所需零部件的要求。本文通过研究微型齿轮结构的粉末注射成形工艺过程,得出较为合理的工艺参数。结果显示,以羰基铁粉为原料成形微型齿轮效果良好,无缺陷的注射坯可以成功地实现脱脂和烧结。
Micro powder injection molding （μ-PM）is an economical fabrication technology for mass production of precise small parts at low cost. This technology is a promising route to produce the parts for micro electro-mechanical systems（MEMS）. The production of carbonyl iron micro gear by μ-PIM was studied. The suitable parameters were obtained. The results show that carbonyl iron micro gears could be successfully produced by μ-PIM. The parts could be successfully debound and sintered.
出处
《粉末冶金工业》
CAS
北大核心
2007年第5期34-39,共6页
Powder Metallurgy Industry
基金
国家973项目子课题(2004CB719802)
国家863计划(No.2006AA032113)
国家自然科学基金重点项目(No.50634010)
关键词
微粉末注射成形
注射成形
微型齿轮
Micro powder injection molding
injection molding： micro-gear
