期刊文献+

胶原-氧化铟锡复合红外低发射率涂料的制备及性能研究 被引量:3

Preparation of Collagen/Indium and Tin Oxide Composite Coating with Low Infrared Emissivity and Study of the Coating's Properties
下载PDF
导出
摘要 采用共沉淀法制备红外低发射率的氧化铟锡(ITO)粉体,用液-液分散法制备了胶原-ITO复合物。以胶原-ITO复合物为颜料,环氧树脂为粘合剂,加入各种助剂,制得胶原-ITO复合红外低发射率涂料,并将涂料制成涂层。试验结果表明:胶原-ITO复合红外低发射率涂料的临界颜料体积(CPVC)为47.5%,涂层的红外发射率(1~22μm,8~14μm,3~5μm)为0.648~0.674,涂层耐温性为354.9℃,硬度、耐磨性、附着力等力学性能良好。 Indium and tin oxide(ITO)powders with low infrared(IR)emissivity were prepared using chemical co-precipitation method.The collagen/ITO composites were then prepared via liquid-liquid dispersion route.Further,the collagen/ITO composites were used as the pigments to prepare collagen/ITO composite paints and coatings with low IR emissivity,using epoxy resin as a binder in the presence of various auxiliary agents.The critical pigment volume concentration(CPVC)of the collagen/ITO composite paints were measured,while the IR emissivity of the corresponding collagen/ITO composite coatings was evaluated as well.Moreover,the thermal behavior of the composite coatings was examined using differential scanning calorimetry and thermogravimetric analysis,and their mechanical properties and wear resistance were also evaluated.It was found that the critical pigment volume concentration(CPVC)for the collagen/ITO composite paint was 47.5%,and the IR emissivity(1-22 μm,8-14 μm,3-5 μm)of the corresponding composite coating was 0.648-0.677.Besides,the composite coating had good thermal stability at elevated temperature,with the hardness,wear resistance,and adhesion to substrate being well retained at 354.9℃.
出处 《材料保护》 CAS CSCD 北大核心 2007年第3期40-43,共4页 Materials Protection
基金 新世纪优秀人才支持计划资助项目(NCET-04-0482) 国家自然科学基金资助项目(50377005) 江苏省自然科学基金资助项目(BK2003064)
关键词 胶原 胶原-ITO复合物 红外发射率 涂料 collagen collagen/ITO composite IR emissivity composite coating
  • 相关文献

参考文献10

  • 1Bierwagen G P,Tallman D E.Choice and measurement of crucial aircraft coatings systems properties[J].Progress in Organic Coatings,2001,41:201~216. 被引量:1
  • 2Kickelbick,Guido.Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale[J].Progress in Polymer Science,2003,28:83~114. 被引量:1
  • 3Bjelopavlic M S,El-Shall H,Moudgil B M.Role of Surface Molecular Architecture and Energetics of Hydrogen Bonding Sites in Adsorption of Polymers and Surfactants[J].Journal of Colloid and Interface Science,2000,226:159~165. 被引量:1
  • 4李新华,陈雷,孟晓雄,孙彦平.国外涂料型红外隐身材料研制现状和发展方向分析[J].红外技术,1994,16(1):5-11. 被引量:58
  • 5费逸伟,黄之杰,唐卫红,李华强,朱富进.颜料对低发射率涂料红外辐射特性的影响[J].材料科学与工程,2002,20(3):449-452. 被引量:44
  • 6Dexpert P P,Tourillon G,Grimal J M.Structural study of tin-doped indium oxide thin films using X-ray absorption spectroscopy and X-ray diffraction[J].J Electrochem Soc,1992,139(1):276~281. 被引量:1
  • 7Shan Y,Zhou Y M,Cao Y,et al.Preparation and infrared emissivity study of collagen-g-PMMA/ITO nanocomposite[J].Materials Letters,2004(58):1 655~1660. 被引量:1
  • 8Elsner C I,Cavalcanti E,Ferraz O,et al.Evaluation of the Surface treatment effect on the anticorrosive performance of paint systems on steel[J].Progress in Organic Coatings,2003.48:50~62. 被引量:1
  • 9叶扬祥,潘肇基主编..涂装技术实用手册 第2版[M].北京:机械工业出版社,2003:717.
  • 10罗志勇.红外涂层发射率的理论研究[J].红外技术,2000,22(5):23-27. 被引量:16

二级参考文献9

共引文献103

同被引文献32

引证文献3

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部