摘要
柔性贴膜作为一种集约束层与吸收层于一体的新手段,使激光冲击技术有了更好的工程实际应用性。为了解决原技术中约束效果较差的问题,采用丙烯酸合成树脂与聚氯乙烯胶来代替硅胶做约束层。试验结果表明,这二者的约束效果远优于硅胶,冲击后材料的硬度均达到33HV以上,最大残余压应力均在60MPa左右,接近光学玻璃约束的水平(硬度与残余应力分别约34HV,70MPa),很好地解决了硅胶约束效果较差的问题,使柔性贴膜技术更趋近于实用化。
The flexible coating is an energy conversion body that consists of confinement layer and absorbing layer,so that laser shock processing（LSP） can be applied in engineering. For the sake of resolving original problem of bad shocking effect,the crylic acid synthetic resin and polyving 1 chloride （PVC） glue were used to replace silicone jelly. The result indicated：the materials hardness after laser shocking all exceeded 33HV and maximum residual stress approximately achieved 60MPa,which are comparative level with K9 optical glass（ hardness and residual stress are 34HV and 70MPa separately）. Flexible coating based on macromolecule materials can become the better energy conversion body that make LSP more practical.
出处
《激光技术》
CAS
CSCD
北大核心
2007年第1期65-67,共3页
Laser Technology
基金
国家自然科学基金资助项目(50275068)
国家八六三计划资助项目(2002AA336030)
关键词
激光技术
柔性贴膜
激光冲击
约束层
吸收层
laser technique
flexible coating
laser shock processing
confinement layer
absorbing layer
