摘要
在不同的氧分压下用电子束热蒸发的方法制备了氧化锆薄膜。用扫描探针显微镜、X射线衍射仪和分光光度计分别对薄膜的表面粗糙度、微结构和透射谱等特性进行了表征。实验发现,薄膜沉积中氧分压与薄膜性质及微结构有密切的关系。当氧分压由3.0×10-3Pa升高到11×10-3Pa,薄膜的表面粗糙度由3.012nm降低到1.562nm,而薄膜的折射率由2.06降低到2.01。此外,X射线的衍射还发现,薄膜是以四方相为主多相共存的,随着氧分压的增加,特征衍射峰强度逐渐减弱,最后完全变成非晶。
ZrO2 films were prepared by electron beam evaporation at different oxygen partial pressure. The film properties such as surface roughness, microstructure and transmission spectra were characterized by using Scanning Probe Microscopy （SPM）, X-ray diffraction and spectrophotometer respectively. The results indicate that the film properties and microstructure correlate with the oxygen partial pressure in deposition process. When oxygen partial pressure increased from 3.0×10^-3Pa to 11×10^-3Pa, the surface roughness decreased from 3.012nm to 1.562 nm, and the refractive index decreased from 2.06 to 2.01. X-ray diffraction results indicate that the films consist of many phases and tetragonal phase is the dominant phase. With the increase of the oxygen partial pressures, the intensity of the character diffraction peak decreases gradually until it changes into amorphous at last.
出处
《光电工程》
EI
CAS
CSCD
北大核心
2006年第6期37-40,52,共5页
Opto-Electronic Engineering
基金
深圳大学科研启动基金资助课题(200617)
关键词
氧化锆薄膜
氧分压
表面迁移率
薄膜特性
ZrO2 film
Oxygen pressure
Surface mobility
Film Characteristics
