期刊文献+

内燃机机油泵供油特性的试验研究 被引量:5

The Experimental Study on the Supplying Properties of Oil Pump in Internal Combustion Engines
下载PDF
导出
摘要 通过试验分析了机油温度、机油泵转速以及出油压力等因素对机油泵供油特性的影响,并分析了在各种工况下这些影响因素之间的联系。研究表明,机油泵转速对机油泵供油特性的影响最明显,出油压力的影响次之,温度的影响最弱。机油泵的供油量随着转速的增加而增加,随着机油温度的升高或出油压力的增大而稍有下降。 Influences from oil temperature, oil pump rotate speed and supplying pressure on the supplying properties of oil pump in internal combustion engine are experimentally studied. And relationships of these factors under each working condition are also examined here. Results show that the influence from oil pump rotate speed is most evident, while the influence from oil temperature is the smallest. The quantity of oil that oil pump supplies is increasing with the oil pump rotate while decreasing slightly with the increasing of oil temperature or of supplying pressure.
出处 《内燃机》 2006年第3期11-13,21,共4页 Internal Combustion Engines
基金 国家自然科学基金资助项目(50575065)
关键词 机油泵 供油特性 试验研究 oil pump supplying properties experimental study
  • 相关文献

参考文献8

二级参考文献5

  • 1Schwaderlapp M 等. Leichtbau und Reibungsreduzierung-Konstruktive Potenziale zur Erfullung yon Verbrauchszielen.Wien-Kongress, 2000 被引量:1
  • 2Schwaderlapp M 等. Reibungsminderung-Konstruktive Beitrage zur Kraftstoffeinsparung. Aachener Kolloquium Fahrzeug-und Motorentechnik, 2002 被引量:1
  • 3Koch F等. Optlmierung des Warmemanagements yon Kraftfahrzeugen. HDT,2000 被引量:1
  • 4Koch F 等. Friction Losses of Combustion Engines Measurement,Analysis and Optimization. ICE 99 ,Capri, 1999,9,15 - 18 被引量:1
  • 5Patir N 等. Application of Average Flow Model to Lubrication between Rough Sliding Surfaces. Transactions of ASME, 1979,101 (4) 被引量:1

共引文献10

同被引文献31

引证文献5

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部