期刊文献+

等离子喷涂氧化锆涂层的显微结构分析

Analysis on the Microstructure of Zirconia Coating Deposited by Plasma Spraying Technique
下载PDF
导出
摘要 利用透射电镜(TEM)、扫描电镜(SEM)和X射线衍射仪(XRD)等分析技术,表征了等离子喷涂氧化锆涂层的显微结构。结果表明:等离子喷涂氧化锆涂层是由典型的柱状晶粒组成的层状结构;柱状晶粒晶型发育完整,晶粒之间具有清楚晶界;涂层表面存在明显的完全熔融区和未熔融区;涂层中分布有一定的大气孔。涂层的主晶相是四方氧化锆,没有单斜氧化锆相存在;涂层中裂纹的扩展是穿晶断裂和沿晶断裂共存。 The microstructure of zirconia mating deposited by plasma spraying technique was studied by means of FESEM, SEM, TEM and XRD. The results show that zirconia mating is typical lamdlar structure composed of column grain. The phase analysis showed that the monoclinic phase was transformed into tetragonal zirconia. The bonding was riot good between the substrate and mating, and some large lores were found in the mating. There existed the fully molten area and unfully molten area in the surface of the coating. The fracture mode is intergranular fracture and intragranular fracture. The spraying lower and spraying distance have a great influence on the quality of the mating.
出处 《硅酸盐通报》 CAS CSCD 北大核心 2006年第2期64-67,共4页 Bulletin of the Chinese Ceramic Society
关键词 等离子喷涂 氧化锆 涂层 显微结构 zirconia coating plasma spray microstructure
  • 相关文献

参考文献4

二级参考文献12

共引文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部