摘要
应用聚丙烯酰胺作为絮凝剂,在黄河水处理中,对影响其絮凝效果的因素进行了初步探讨。结果表明,在100mL低浊度的黄河水中,添加浓度为0.1%的PAM0.09mL,温度25℃、180r/min搅拌速度下搅拌2min,再静置6min以上的絮凝效果最好。
<Abstrcat> Using the polyacrylamide as the flocculation agent, the factors influencing the flocculation effect on the water from the Yellow River are discussed. The results show that the best flocculation effect in 100 mL low turbidity water is the treatment of adding 0.1% PAM 0.09 mL, 25 ℃,180 r/min for 2 minutes, and depositing for more than 6 minutes.
出处
《天津农学院学报》
CAS
2005年第2期33-35,共3页
Journal of Tianjin Agricultural University
关键词
聚丙烯酰胺
黄河水
絮凝
polyacrylamide(PAM)
Yellow River water
flocculation
