期刊文献+

地面三维激光扫描点云分辨率研究 被引量:34

Research on the Point Cloud Resolutions of TLS
下载PDF
导出
摘要 分辨率决定了从点云中提取目标细节的能力,可分为平面分辨率、距离分辨率和强度分辨率。分析了在分辨率中起主导作用的平面分辨率的主要影响因素,得出了计算平面分辨率的理论公式并通过实验验证了其正确性,对地面三维激光扫描实际应用具有指导意义。 TLS(Terrestrial Laser Scanning)uses laser to measure the 3D coordinates of a given region of an objeet's surface automatically,in a systematic order at a high rate in near real time.TLS is a method which can get the 3D model of the object directly.Due to its high speed in obtaining unstructured point clouds from all surfaces within the field of view,TLS can be used in many fields such as deformation monitoring,3D modeling of building or other large scale scene. The data from TLS have the format of point cloud.Compared with traditional survey method,TLS focuses not only on the accuracy of single point position but also on the modeling accuracy of the 3D surface.Therefore,some resolutions are im- portant characters in the point cloud.The resolutions govern the level of identifiable details within the scanned point cloud.These resolutions can be classified into angular,range and intensity resolution.The first one is like an indicator of resolutions and is the focus of this study.The main issues concern the impact of angular resolution by different scan range and angle.Based on the principle of TLS,the basic relations and formulas concerning the accuracy are put forward for dif- ferent scan range and angle.And then,a Leica HDS3000 laser scanner is used to testify in the field. The first test is concerned with the change of accuracy by different scan range.A piece of plane ground is selected for scanning,and a rectangle range is cut from the point cloud to calculate the histogram of distances from the scan points to the scanner.Contrast with the theoretical number of scan points,the curves calculated appear quite similar.The result can be explained when the scan range increases,the point density decreases. The second test is concerned with the change of accuracy by different scan angle.Seven targets are set and scanned in different angle from 0 to 60 degree but in the same distance to the scanner.In each target's point cloud,the number of points is calculated.The chart of number of points is fitted to the theoretical
作者 朱凌 石若明
出处 《遥感学报》 EI CSCD 北大核心 2008年第3期405-410,共6页 NATIONAL REMOTE SENSING BULLETIN
基金 北京市教育委员会科技发展计划面上项目(编号:km200510016011) 中共北京市委组织部优秀人才培养资助D类项目(编号:20061D0501700250)
关键词 地面三维激光扫描 平面分辨率 平面点密度 TLS angular resolution point density
  • 相关文献

参考文献6

  • 1[2]Boehler W,Marbs,A.Investigating Laser Scanner Accuracy[R].URL:http://scanning.fh-mainz.de/scannertest/results 300303.pdf,2005. 被引量:1
  • 2[3]Derek D Lichti.A Resolution Measure for Terrestrial Laser Scanners[A].The International Archives of the Photogrammetry,Remote Sensing and Spatial Information Sciences[C].2004,34:Part×××. 被引量:1
  • 3[4]Hannu Hyypp,Yu X W,Juha Hyypp,et al.Factors Affecting the Quality of DTM Generation in Forested Areas[C].ISPRS WG Ⅲ/3,Ⅲ/4,V/3 Workshop "Laser scanning 2005",Enschede,the Netherlands,September 12-14,2005. 被引量:1
  • 4[5]Eero Ahokas,Yu X W,Juha Oksanen,et al.Optimization of Scanning Angle for Countrywide Laser Scanning[C].ISPRS WG Ⅲ/3,Ⅲ/4,V/3 Workshop "Laser scanning 2005",Enschede,the Netherlands,September 12-14,2005. 被引量:1
  • 5[6]Yuriy Reshetyuk.Investigation and Calibration of Pulsed Time-of-Flight Terrestrial Laser Scanners[D].Licentiate Thesis in Geodesy,Royal Institute of Technology (KTH),2006. 被引量:1
  • 6[7]Mills J.Barber D.An Addendum to the Metric Survey Specifications for English Heritage:the Collection and Archiving of Point Cloud data Obtained by Terrestrial Laser Scanning or Other Methods[R].Version 11/12/2003.URL:http://www.heritage3d.org/.,2003. 被引量:1

同被引文献279

引证文献34

二级引证文献229

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部