A two-dimensional model was established for the first time by coupling moving wire and arc in CMT-WAAM and GMAWWAAM process,revealing the temperature,potential and droplet transition behavior of droplet metal.The drop...A two-dimensional model was established for the first time by coupling moving wire and arc in CMT-WAAM and GMAWWAAM process,revealing the temperature,potential and droplet transition behavior of droplet metal.The droplet transition and the change of droplet transfer mode under different wire feeding speed were analyzed.The experiments and numerical simulation research found that droplet transition mode is projected transfer in GMAW-WAAM process under 150 A current,with a complete transition period is 14 ms.The droplet transition shows a short-circuit transition mode in CMT-WAAM process,with wire feeding speed of 5.5 m/min and a complete transition period is 20 ms.The droplet transition shows a mixture of droplet transfer and short-circuit transition mode in CMT-WAAM process,with wire feeding speed of 5.5 m/min and a complete transition period is 23 ms.Based on the theoretical research and experimental studies,the mechanism of droplet transfer mode in WAAM was studied,which can provide reference for optimizing parameters.展开更多
Short-arc pulsed gas metal arc welding(P-GMAW)was used to solve the dificulties of molten pool spreading and droplet transfer of Ni-based welding wire.Suppression of short-circuit current was used to reduce spatter.Ar...Short-arc pulsed gas metal arc welding(P-GMAW)was used to solve the dificulties of molten pool spreading and droplet transfer of Ni-based welding wire.Suppression of short-circuit current was used to reduce spatter.Arc length stabilizer was used to acquire a proper and stable arc length maintained at the critical position where short circuit starts to occur.Short-arc P-GMAW with or without arc length stabilizer was compared.The droplet transfer,arc behaviors and weld bead profiles were investigated and compared based on the high-speed photography and observation of weld cross-section.When the arc length stabilizer was deactivated,the arc length was unstable and too short.The droplet transfer mode was mainly short circuit partial transfer,with only a small part of the droplet transferred into the molten pool,with the characteristics of no obvious necking,a few spatters,small droplet impact,long short circuit duration and high short-circuit current.There was also a small proportion of short circuit complete transfer with obvious necking,larger droplet impact,shorter short-circuit duration and lower short-circuit current.With arc length stabilizer,droplet transfer modes were short circuit complete transfer and spray transfer.The spray transfer had the largest droplet impact,no short circuit and no spatter.With the arc length stabilizer activated,a deep penetration,a high penetration ratio,a small reinforcement and a large reinforcement factor were acquired.This provides an innovative method to solve the difficulties of droplet transfer and molten pool spreading and eliminate the incomplete fusion in the GMAW of 9%Ni steel with nickel-based alloy welding wire.展开更多
在冷金属过渡(cold metal transfer,CMT)电弧增材制造过程中,熔池的流动行为极易受到电弧和熔滴的影响,从而严重影响堆积层的稳定性和成形件质量.该文利用高速摄影结果及电信号参数波形图,引入热输入量计算公式,从特征电信号、熔滴过渡...在冷金属过渡(cold metal transfer,CMT)电弧增材制造过程中,熔池的流动行为极易受到电弧和熔滴的影响,从而严重影响堆积层的稳定性和成形件质量.该文利用高速摄影结果及电信号参数波形图,引入热输入量计算公式,从特征电信号、熔滴过渡特征量、热输入量等方面定量分析了CMT+P模式下送丝速度及脉冲修正系数对熔滴过渡过程及单道成形形貌的影响,同时分析了脉冲变极性冷金属过渡(Advanced CMT,CMT+PA)模式下送丝速度及控制面板上的EP/EN修正系数η对熔滴过渡过程及单道成形形貌的影响,为后续工艺优化提供参考和指导.展开更多
In this paper, the droplet transfer in oscillating arc narrow gap gas metal arc （ GMA ） welding was studied. According to the experimental results, the oscillating arc has effect on the droplet transfer mode. The dr...In this paper, the droplet transfer in oscillating arc narrow gap gas metal arc （ GMA ） welding was studied. According to the experimental results, the oscillating arc has effect on the droplet transfer mode. The droplet transfer frequency in narrow gap groove is higher than that in bead-on-plate welding. Because of the change of arc location in narrow gap groove, the droplet transfer in oscillating arc narrow gap changes regularly. The droplet transfer frequency near groove sidewall is higher than that at the middle of narrow gap groove.展开更多
Herein,a numerical simulation with simultaneous heat and mass transfers is carried out to investigate the scrap melting characteristics in molten steel after model verification by published experimental data.The numer...Herein,a numerical simulation with simultaneous heat and mass transfers is carried out to investigate the scrap melting characteristics in molten steel after model verification by published experimental data.The numerical results show that the scrap melting stages consist of the frozen shell formation stage,the frozen shell remelting stage and the parent scrap melting stage.The heat transfer coefficient and the carbon mass transfer coefficient between the scrap and the molten steel are,respectively,in the range of 4209-6249 W m^(-2) K^(-1) and 6.4×10^(-5) m s^(-1).Meanwhile,the effects of process parameters on scrap melting time were studied.An increase in the scrap preheating temperature(T_(scrap)),the molten steel temperature(T_(steel))and the carbon content of molten steel(C_(steel)),and a decrease in the scrap thickness dscrap,can reduce the frozen shell existence time,as well as the scrap melting time.On this basis,a quantitative relationship between the aforementioned process parameters and the scrap melting time is obtained to predict the formation of frozen shell(W),which provides process guidance for shortening the scrap melting time.The quantitative relationship is expressed as:lnΨ=311.32-2.34ln(T_(scrap))-39.99ln(T_(steel))-0.08ln(d_(scrap))-0.57ln(C_(steel)).展开更多
文摘A two-dimensional model was established for the first time by coupling moving wire and arc in CMT-WAAM and GMAWWAAM process,revealing the temperature,potential and droplet transition behavior of droplet metal.The droplet transition and the change of droplet transfer mode under different wire feeding speed were analyzed.The experiments and numerical simulation research found that droplet transition mode is projected transfer in GMAW-WAAM process under 150 A current,with a complete transition period is 14 ms.The droplet transition shows a short-circuit transition mode in CMT-WAAM process,with wire feeding speed of 5.5 m/min and a complete transition period is 20 ms.The droplet transition shows a mixture of droplet transfer and short-circuit transition mode in CMT-WAAM process,with wire feeding speed of 5.5 m/min and a complete transition period is 23 ms.Based on the theoretical research and experimental studies,the mechanism of droplet transfer mode in WAAM was studied,which can provide reference for optimizing parameters.
基金the MARK III Materials Research Project of Ministry of Industry and Information Technology of China。
文摘Short-arc pulsed gas metal arc welding(P-GMAW)was used to solve the dificulties of molten pool spreading and droplet transfer of Ni-based welding wire.Suppression of short-circuit current was used to reduce spatter.Arc length stabilizer was used to acquire a proper and stable arc length maintained at the critical position where short circuit starts to occur.Short-arc P-GMAW with or without arc length stabilizer was compared.The droplet transfer,arc behaviors and weld bead profiles were investigated and compared based on the high-speed photography and observation of weld cross-section.When the arc length stabilizer was deactivated,the arc length was unstable and too short.The droplet transfer mode was mainly short circuit partial transfer,with only a small part of the droplet transferred into the molten pool,with the characteristics of no obvious necking,a few spatters,small droplet impact,long short circuit duration and high short-circuit current.There was also a small proportion of short circuit complete transfer with obvious necking,larger droplet impact,shorter short-circuit duration and lower short-circuit current.With arc length stabilizer,droplet transfer modes were short circuit complete transfer and spray transfer.The spray transfer had the largest droplet impact,no short circuit and no spatter.With the arc length stabilizer activated,a deep penetration,a high penetration ratio,a small reinforcement and a large reinforcement factor were acquired.This provides an innovative method to solve the difficulties of droplet transfer and molten pool spreading and eliminate the incomplete fusion in the GMAW of 9%Ni steel with nickel-based alloy welding wire.
文摘在冷金属过渡(cold metal transfer,CMT)电弧增材制造过程中,熔池的流动行为极易受到电弧和熔滴的影响,从而严重影响堆积层的稳定性和成形件质量.该文利用高速摄影结果及电信号参数波形图,引入热输入量计算公式,从特征电信号、熔滴过渡特征量、热输入量等方面定量分析了CMT+P模式下送丝速度及脉冲修正系数对熔滴过渡过程及单道成形形貌的影响,同时分析了脉冲变极性冷金属过渡(Advanced CMT,CMT+PA)模式下送丝速度及控制面板上的EP/EN修正系数η对熔滴过渡过程及单道成形形貌的影响,为后续工艺优化提供参考和指导.
基金They also thank the National Natural Science Foundation of China for its financial support
文摘In this paper, the droplet transfer in oscillating arc narrow gap gas metal arc （ GMA ） welding was studied. According to the experimental results, the oscillating arc has effect on the droplet transfer mode. The droplet transfer frequency in narrow gap groove is higher than that in bead-on-plate welding. Because of the change of arc location in narrow gap groove, the droplet transfer in oscillating arc narrow gap changes regularly. The droplet transfer frequency near groove sidewall is higher than that at the middle of narrow gap groove.
基金funded by the National Key R&D Program of China(Grant No.2017YFB0304205)Fundamental Research Funds for the Central Universities(Grant No.N2225046).
文摘Herein,a numerical simulation with simultaneous heat and mass transfers is carried out to investigate the scrap melting characteristics in molten steel after model verification by published experimental data.The numerical results show that the scrap melting stages consist of the frozen shell formation stage,the frozen shell remelting stage and the parent scrap melting stage.The heat transfer coefficient and the carbon mass transfer coefficient between the scrap and the molten steel are,respectively,in the range of 4209-6249 W m^(-2) K^(-1) and 6.4×10^(-5) m s^(-1).Meanwhile,the effects of process parameters on scrap melting time were studied.An increase in the scrap preheating temperature(T_(scrap)),the molten steel temperature(T_(steel))and the carbon content of molten steel(C_(steel)),and a decrease in the scrap thickness dscrap,can reduce the frozen shell existence time,as well as the scrap melting time.On this basis,a quantitative relationship between the aforementioned process parameters and the scrap melting time is obtained to predict the formation of frozen shell(W),which provides process guidance for shortening the scrap melting time.The quantitative relationship is expressed as:lnΨ=311.32-2.34ln(T_(scrap))-39.99ln(T_(steel))-0.08ln(d_(scrap))-0.57ln(C_(steel)).
