Titanium metal and alloy are key materials for technological development,which significantly promote the development of the hightech economy in China.The consumption of high-end titanium materials and the developmenta...Titanium metal and alloy are key materials for technological development,which significantly promote the development of the hightech economy in China.The consumption of high-end titanium materials and the developmental level of the titanium industry are important indexes of a country’s comprehensive power.However,at present,the application amount and level of high-end titanium materials in China are limited by many factors,including the dependence of raw materials on imports,high processing cost,and structural imbalance of products.Based on the characteristics of titanium resources and the current situation of the titanium industry,the whole titanium industrial chain in China should be updated.Improving the quality of raw materials is important to produce low-cost,high-end titanium materials using titanium resources with high calcium and magnesium contents in the Panxi region.In addition,the steel-titanium joint production is a vital step to reduce the processing cost of titanium materials.Moreover,the consumption structure of titanium materials should be completed to expand their application.Gradually implementing these suggestions,the overall level of China’s titanium industry will be greatly improved,thereby rapidly establishing an advanced scientific and technological country.展开更多
The effect of intermetallic compounds on the heat resistance of transition joint was investigated. The experiment of post-weld heat treatment for the hot roll bonded titanium alloy-stainless steel joint using nickels ...The effect of intermetallic compounds on the heat resistance of transition joint was investigated. The experiment of post-weld heat treatment for the hot roll bonded titanium alloy-stainless steel joint using nickels interlayer was carried out, and the interface microstructure evolution due to heat treatment was presented. There was not found significant interdiffusion at stainless steel/nickel interface, when the specimens were heat treated in the temperature range of 600-800 °C for 10 and 30 min, while micro-cracks occurred at the stainless steel/nickel interface heat treated at 700 °C for 30 min. The thickness of intermetallic layers at nickel/titanium alloy interface increased at 600 °C, and micro-cracks occurred at 700 and 800 °C. The micro-cracks occurred between intermetallic layers or between intermetallic layer and nickel interlayer as well. The tensile strength of the transition joint decreased with the increase of heat treatment temperature or holding time.展开更多
Ti-Zr-Cu-Ni amorphous filler with good performance is suitable for joining TC and TB titanium alloy, but its melting temperature is higher than 882.5°C, the α→β phase transition temperature of TA2, which makes...Ti-Zr-Cu-Ni amorphous filler with good performance is suitable for joining TC and TB titanium alloy, but its melting temperature is higher than 882.5°C, the α→β phase transition temperature of TA2, which makes the ductility of TA2 fall and the microstructure of the joint coarse. In this paper, Ti-Zr-Cu-Ni amorphous filler was redesigned and optimized by using orthogonal experiment to obtain three easy-to-use Zr-Ti-Ni-Cu amorphous fillers with low melting points and good plasticity. The fast cooling equipment was used to fabricate the brazing filler foils to implement the braze welding of TA2 and Q235 with high frequency inductance. The results indicate that all the brazing foils are amorphous structure with lower melting temperature, for example, Zr52Ti22Ni18Cu8 filler’s is 538°C. The technical parameters in brazing welding are: welding temperature T = 800°C;heating electric current I =25 A;heating time t = 15 s and holding time t = 15 s, in the case of these conditions, the jointing head shear strength of TA2/Zr52Ti24Ni13Cu11/Q235 is 139 MPa. Fracture is mainly located in the brazing seam. The white brittle intermetallic TiFe, TiFe2 and enhancement TiC spread in the center zone of brazing seam.展开更多
文摘Titanium metal and alloy are key materials for technological development,which significantly promote the development of the hightech economy in China.The consumption of high-end titanium materials and the developmental level of the titanium industry are important indexes of a country’s comprehensive power.However,at present,the application amount and level of high-end titanium materials in China are limited by many factors,including the dependence of raw materials on imports,high processing cost,and structural imbalance of products.Based on the characteristics of titanium resources and the current situation of the titanium industry,the whole titanium industrial chain in China should be updated.Improving the quality of raw materials is important to produce low-cost,high-end titanium materials using titanium resources with high calcium and magnesium contents in the Panxi region.In addition,the steel-titanium joint production is a vital step to reduce the processing cost of titanium materials.Moreover,the consumption structure of titanium materials should be completed to expand their application.Gradually implementing these suggestions,the overall level of China’s titanium industry will be greatly improved,thereby rapidly establishing an advanced scientific and technological country.
基金Project(AWPT-M07)supported by the State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology
文摘The effect of intermetallic compounds on the heat resistance of transition joint was investigated. The experiment of post-weld heat treatment for the hot roll bonded titanium alloy-stainless steel joint using nickels interlayer was carried out, and the interface microstructure evolution due to heat treatment was presented. There was not found significant interdiffusion at stainless steel/nickel interface, when the specimens were heat treated in the temperature range of 600-800 °C for 10 and 30 min, while micro-cracks occurred at the stainless steel/nickel interface heat treated at 700 °C for 30 min. The thickness of intermetallic layers at nickel/titanium alloy interface increased at 600 °C, and micro-cracks occurred at 700 and 800 °C. The micro-cracks occurred between intermetallic layers or between intermetallic layer and nickel interlayer as well. The tensile strength of the transition joint decreased with the increase of heat treatment temperature or holding time.
文摘Ti-Zr-Cu-Ni amorphous filler with good performance is suitable for joining TC and TB titanium alloy, but its melting temperature is higher than 882.5°C, the α→β phase transition temperature of TA2, which makes the ductility of TA2 fall and the microstructure of the joint coarse. In this paper, Ti-Zr-Cu-Ni amorphous filler was redesigned and optimized by using orthogonal experiment to obtain three easy-to-use Zr-Ti-Ni-Cu amorphous fillers with low melting points and good plasticity. The fast cooling equipment was used to fabricate the brazing filler foils to implement the braze welding of TA2 and Q235 with high frequency inductance. The results indicate that all the brazing foils are amorphous structure with lower melting temperature, for example, Zr52Ti22Ni18Cu8 filler’s is 538°C. The technical parameters in brazing welding are: welding temperature T = 800°C;heating electric current I =25 A;heating time t = 15 s and holding time t = 15 s, in the case of these conditions, the jointing head shear strength of TA2/Zr52Ti24Ni13Cu11/Q235 is 139 MPa. Fracture is mainly located in the brazing seam. The white brittle intermetallic TiFe, TiFe2 and enhancement TiC spread in the center zone of brazing seam.
