The evolution of mining-induced stress field in longwall panel is closely related to the fracture field and the breaking characteristics of strata.Few laboratory experiments have been conducted to investigate the stre...The evolution of mining-induced stress field in longwall panel is closely related to the fracture field and the breaking characteristics of strata.Few laboratory experiments have been conducted to investigate the stress field.This study investigated its evolution by constructing a large-scale physical model according to the in situ conditions of the longwall panel.Theoretical analysis was used to reveal the mechanism of stress distribution in the overburden.The modelling results showed that:(1)The major principal stress field is arch-shaped,and the strata overlying both the solid zones and gob constitute a series of coordinated load-bearing structures.The stress increasing zone is like a macro stress arch.High stress is especially concentrated on both shoulders of the arch-shaped structure.The stress concentration of the solid zone in front of the gob is higher than the rear solid zone.(2)The characteristics of the vertical stress field in different regions are significantly different.Stress decreases in the zone above the gob and increases in solid zones on both sides of it.The mechanical analysis show that for a given stratum,the trajectories of principal stress are arch-shaped or inverselyarched,referred to as the‘‘principal stress arch’’,irrespective of its initial breaking or periodic breaking,and determines the fracture morphology.That is,the trajectories of tensile principal stress are inversely arched before the first breaking of the strata,and cause the breaking lines to resemble an inverted funnel.In case of periodic breaking,the breaking line forms an obtuse angle with the advancing direction of the panel.Good agreement was obtained between the results of physical modeling and the theoretical analysis.展开更多
The residual stress generated in the laser cladding could lead to undesirable distortions or even crack formation. In order to better understand the evolution/yielding process of stress field,a 3 D finite-element ther...The residual stress generated in the laser cladding could lead to undesirable distortions or even crack formation. In order to better understand the evolution/yielding process of stress field,a 3 D finite-element thermo-mechanical model was established for the laser cladding formation of thin wall with the 17-4 PH powder on the FV520( B) steel. The temperature field was firstly analyzed,based on which the stress field and strain field of the laser cladding forming process were analyzed.In order to validate the prediction,the final residual stress field in the obtained thin wall was tested by X-ray diffraction in comparison with the predicted results.展开更多
Tectonically, the northwestern South China Sea （SCS） is located at the junction between three micro-plates, i.e., the Indochina, South China and Zhongsha-Xisha micro-plates, and involves three basins, i.e., the Ying...Tectonically, the northwestern South China Sea （SCS） is located at the junction between three micro-plates, i.e., the Indochina, South China and Zhongsha-Xisha micro-plates, and involves three basins, i.e., the Yinggehai Basin, the Qiongdongnan Basin and Xisha Trough in the east, and the Zhongjiannan Basin in the south. Since the Pliocene （5.3 Ma）, the Yinggehai Basin has experienced repeated accelerating subsidence, high thermal fluid, and widely developing mud-rich overpressure chambers, abundant mud diapers and crust-mantle mixed CO2. While a large central canyon was developed in the Qiongdongnan Basin, new rift occurred in the Xisha ~rough. These characteristics demonstrate a single tectonic unit for the northwestern SCS, for which we have undertaken stress field modeling to understand its plate deformations and sedimen- tary responses. Our results demonstrate that an extension tectonic event occurred after 5.3 Ma in theYingge- hal-Qiongdongnan-Xisha trough area, which is characterized by thinner crust C〈16000 m）, half-graben or graben structural style and thicker sedimentary sequences （〉3 500 m）. A new rift system subsequently was developed in this area; this event was mainly driven by the combined effects of different movement veloc- ity and direction of the three micro-plates, and the far-field effect of the continental collision between the Indian Plate and the Tibetan Plateau, and subduction of the Pacific Plate underneath the Eurasian Plate.展开更多
基金This work was supported by the National Natural Science Foundation of China(NSFC,Grant No.51874175)the China Coal Technology&Engineering Group Foundation(Grant Nos.2018RC001,KJ-2018-TDKCZL-02).Comments from two anonymous reviewers and the editor are also greatly appreciated.
文摘The evolution of mining-induced stress field in longwall panel is closely related to the fracture field and the breaking characteristics of strata.Few laboratory experiments have been conducted to investigate the stress field.This study investigated its evolution by constructing a large-scale physical model according to the in situ conditions of the longwall panel.Theoretical analysis was used to reveal the mechanism of stress distribution in the overburden.The modelling results showed that:(1)The major principal stress field is arch-shaped,and the strata overlying both the solid zones and gob constitute a series of coordinated load-bearing structures.The stress increasing zone is like a macro stress arch.High stress is especially concentrated on both shoulders of the arch-shaped structure.The stress concentration of the solid zone in front of the gob is higher than the rear solid zone.(2)The characteristics of the vertical stress field in different regions are significantly different.Stress decreases in the zone above the gob and increases in solid zones on both sides of it.The mechanical analysis show that for a given stratum,the trajectories of principal stress are arch-shaped or inverselyarched,referred to as the‘‘principal stress arch’’,irrespective of its initial breaking or periodic breaking,and determines the fracture morphology.That is,the trajectories of tensile principal stress are inversely arched before the first breaking of the strata,and cause the breaking lines to resemble an inverted funnel.In case of periodic breaking,the breaking line forms an obtuse angle with the advancing direction of the panel.Good agreement was obtained between the results of physical modeling and the theoretical analysis.
基金supported by a great from the Major State Basic Research Development Program of China(No.2011CB013403)the Scientific Research Foundation for Talent,Guizhou University(No.201665)
文摘The residual stress generated in the laser cladding could lead to undesirable distortions or even crack formation. In order to better understand the evolution/yielding process of stress field,a 3 D finite-element thermo-mechanical model was established for the laser cladding formation of thin wall with the 17-4 PH powder on the FV520( B) steel. The temperature field was firstly analyzed,based on which the stress field and strain field of the laser cladding forming process were analyzed.In order to validate the prediction,the final residual stress field in the obtained thin wall was tested by X-ray diffraction in comparison with the predicted results.
基金The major project of the China National Science and Technology "Large Oil and Gas Fields and Coal bed Gas Development" under contract No.2011ZX05023-003-003the Fundamental Research Funds for the Central Universities under contract No.1350219123
文摘Tectonically, the northwestern South China Sea （SCS） is located at the junction between three micro-plates, i.e., the Indochina, South China and Zhongsha-Xisha micro-plates, and involves three basins, i.e., the Yinggehai Basin, the Qiongdongnan Basin and Xisha Trough in the east, and the Zhongjiannan Basin in the south. Since the Pliocene （5.3 Ma）, the Yinggehai Basin has experienced repeated accelerating subsidence, high thermal fluid, and widely developing mud-rich overpressure chambers, abundant mud diapers and crust-mantle mixed CO2. While a large central canyon was developed in the Qiongdongnan Basin, new rift occurred in the Xisha ~rough. These characteristics demonstrate a single tectonic unit for the northwestern SCS, for which we have undertaken stress field modeling to understand its plate deformations and sedimen- tary responses. Our results demonstrate that an extension tectonic event occurred after 5.3 Ma in theYingge- hal-Qiongdongnan-Xisha trough area, which is characterized by thinner crust C〈16000 m）, half-graben or graben structural style and thicker sedimentary sequences （〉3 500 m）. A new rift system subsequently was developed in this area; this event was mainly driven by the combined effects of different movement veloc- ity and direction of the three micro-plates, and the far-field effect of the continental collision between the Indian Plate and the Tibetan Plateau, and subduction of the Pacific Plate underneath the Eurasian Plate.
